Yes, you can have current leakage with any device. Check the device with an ohm-meter with the POWER turned off. Unplug the device and check between the hot leads and the ground wire. It should be infinite readings. Check also from hot leads to device chassis or metal case.
Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
How far do u put a GFCI receptacle from water
A down stream receptacle that is connected to the upstream GFCI will be protected. If the downstream receptacle senses a fault the upstream GFCI will trip.
The term GFCI stands for Ground Fault Circuit Interrupter.
Your GFCI receptacle may not be working due to a tripped circuit, a faulty GFCI receptacle, or a wiring issue. It is important to troubleshoot and potentially replace the receptacle to ensure safety and functionality.
The GFCI receptacle may not reset due to a faulty connection, a tripped circuit, or a malfunctioning GFCI outlet. It is important to troubleshoot the issue to determine the exact cause and address it accordingly.
If the wall receptacle has tripped but not at the circuit breaker, it could be a faulty GFCI outlet. Try pushing the reset button on the GFCI outlet itself to restore power. If that doesn't work, you may need to replace the GFCI outlet. Make sure to turn off the power at the breaker before attempting any repairs.
The pilot light in a GFCI is an indication that the receptacle is hot, maybe they should add a red pilot light to indicate that no power is coming out of the outlet and green when power is available.
The last answer is incorrect. Some GFCI's are designed to light up when working, some are designed to light up when tripped, some are designed to have different color lights depending on normal or tripped conditions. The only way to tell if the receptacle has power is to TEST it. If the GFCI is supposed to be tripped and power is still available, it is either not operating properly or it is not wired properly. If in doubt, have an electrician inspect it for proper operation. Incorrect answer: >>Provided that the GFCI is wired correctly, the indicator light indicates that the receptacles have power. If the light is off there is a ground fault. In other words, the light should always be on.
Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
The GFCI light may be on even if there is no power because the GFCI outlet has tripped due to a ground fault or electrical issue. This can happen to protect against electric shock. Resetting the GFCI outlet may restore power.
Most probably the receptacles downstream from the GFCI would not be protected by the GFCI receptacle.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
8 ozs. and will vary by mfr. for an in-wall receptacle.
Yes.
How far do u put a GFCI receptacle from water