0
What else can I help you with?
Can you use a 400W high pressure sodium bulb in a metal halide ballast?
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
Can a 175 watt metal halide bulb be used in a 100 watt ballast fixture?
No, a 175-watt metal halide bulb should not be used in a 100-watt ballast fixture. The wattage of the bulb must match the ballast's rating for optimal performance and safety. Using a bulb with a higher wattage than the ballast can lead to overheating, reduced lifespan, and potential damage to both the bulb and the ballast. Always ensure compatibility between the bulb and ballast specifications.
How many 400 watt metal halide lamps will operate off a 1000 watt ballast?
It will power two 400 watt lamps.
Can you run 400watt mh in a 600 watt hps?
Yes, you can run a 400-watt metal halide (MH) bulb in a 600-watt high-pressure sodium (HPS) fixture, but you need to ensure that the ballast is compatible with the MH bulb. Using a 400-watt MH bulb in a 600-watt ballast may lead to reduced efficiency, as the ballast will deliver more power than the bulb requires. It's essential to check the ballast type and ensure that it can operate both bulb types safely. If not compatible, it's best to use the appropriate ballast for the MH bulb to avoid damaging the bulb or the fixture.
What is the difference between a 100watt and a 75 watt bulb?
The amount of light produced and the amount of power consumed. A watt is a unit of power and electrical power is determined using the formula: P = I2*R , Where P is power, I is amps and R is resistance. But using Ohm's law ( V = I * R) the following can be obtained: P = V2/R , Where V is voltage. In US house holds the standard voltage is ~120V, changing the resistance of the filament of the light bulb will change the amount of power consumed and therefore the amount of light produced. The higher the wattage the lower the resistance of the filament. Filaments are used in standard incandescent light bulbs and not in fluorescent tubes or LED fixtures.
4 250 mh bulbs 1 1000 watt mh ballast how to wire?
I would wire them together in a parellel circut. all the lights together, white to white black to black then put your ballast to em. it works like that with my 400 watt mh/hps ballast and 2 250 watt hps bulbs. run 2 hps bulbs with 2 mh bulbs if you can, you get better results.
Can you use a 400W high pressure sodium bulb in a metal halide ballast?
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
Can a 175 watt metal halide bulb be used in a 100 watt ballast fixture?
No, a 175-watt metal halide bulb should not be used in a 100-watt ballast fixture. The wattage of the bulb must match the ballast's rating for optimal performance and safety. Using a bulb with a higher wattage than the ballast can lead to overheating, reduced lifespan, and potential damage to both the bulb and the ballast. Always ensure compatibility between the bulb and ballast specifications.
Can a 34 watt T8 bulb be put in a fixture designed with a 40 watt T12 ballast?
No, it is not recommended to use a higher-wattage bulb in a fixture than what the ballast is designed for. Using a 34 watt T8 bulb with a 40 watt T12 ballast can lead to decreased efficiency, increased risk of damage to the ballast and bulb, and potential safety hazards. It is best to match the bulb wattage with the ballast rating for optimal performance and safety.
Can you use a 70 watt high pressure sodium bulb in a 150 watt ballast?
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
Can you replace a 150 watt hallide with a 175 watt?
no you cant if the ballast is for a 150w bulb you have to retro fit the ballast then u can
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
Can you use a 70 watt metal halide lamp in a 150 watt ballast?
No, it is not recommended to use a 70 watt metal halide lamp with a 150 watt ballast. The lamp and ballast wattage should match to ensure proper operation and to prevent damage to the lamp or ballast. It is best to use a compatible lamp and ballast with matching wattages.
What size ballast do you need for a 430 watt high pressure sodium bulb?
430 watt bulbs are made to juice a little more light from a standard 400 watt ballast. you get about 3-5000 more lumens. A typical 400 watt HPS produces about 50-55,000 lumens. The 430 will put out about 58,000. Not a lot, but a little extra without any increase in power usage.
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
What are the benefits of using 150 watt light bulbs in comparison to lower wattage options?
Using 150 watt light bulbs provides brighter illumination compared to lower wattage options, making it ideal for larger spaces or areas that require more light. Additionally, they can help improve visibility and create a more well-lit environment. However, it's important to consider energy efficiency and potential heat output when using higher wattage bulbs.
What type of 60 watt bulbs are recommended for use with a candelabra?
The recommended type of 60 watt bulbs for use with a candelabra are candelabra bulbs.
