Yes, just splice a potentiometer (dimmer knob) in series and it should work just fine. In fact they are a lot more energy efficient at just a little below max output, and look just as bright.
Remember that dimmers are for incandescent lights only unless you invest BIG BUCKS on dimmable fluorescent lights and fluorescent dimmers. Make sure that the switch that you replace with the dimmer does not control a plug-in outlet unless it is a lamp. You could do harm to an appliance not designed for such use. Otherwise,just add up the wattage of all the bulbs on the dimmer and buy one of the next size rating. So if you have two 60 watt bulbs, two 75 watt bulbs-- that's 270 watts total.Find a dimmer rated for 300 watts or more.
the diode is forward bias ANSWER: A bypass diode is used to bypass circuitry as soon as the diode is forward bias by 0.6 volts The use it to bypass to prevent damage to the circuitry
silicon diode is preferred more when compared with germanium diode because in silicon diode the operating voltage is 0.7v where as in germanium diode the operating voltage is 0.3v , germanium is temperature sensitive so it can be easily destroyed by increasing temperature hence silicon diode is preferred more
scr is basically a three terminal device can be used as diode by leaving one terminal
We use pn junction diode in rfctification as a rectifier becase it allows current to flow in one direction only, i.e. in forward biase only , and stop current to flow in reverse baised. thats why we use pn junction diode in rectification.
Yes
Christmas lights
because you can
Nowadays So many types of Christmas lights are available. Below are some given: 1. Traditional Mini Christmas Lights 2. LED Christmas Lights 3. Musical Christmas Lights 4. C Bulb Style Christmas Lights 5. Battery Powered Christmas Lights 6. Remote Controlled Christmas Lights 7. Candle Christmas Lights 8. Net Style Christmas Lights 9. Solar Powered Christmas Lights 10. Globe Christmas Lights
An example of using Christmas lights to decorate for Halloween would be the use of white Christmas lights. These can be used to light up a collection of jackolanterns.
You can obtain outdoor LED Christmas lights anywhere that other Christmas lights are sold. Simply be sure to check the packaging to ensure that the lights are marked as suitable for outdoor use.
You cannot use most fluorescent lights with a dimmer. Just about any incandescent bulb WILL work with a dimmer. Occasionally, when a halogen bulb burns out, it will destroy a dimmer switch but halogen bulbs are considered incandescent and other than that little problem they work well with a dimmer.
The Christmas tree was covered with scintillating lights and ornaments.
I use sticky clips
You use some string
On your dash, just to the right of the headlight switch is a dimmer wheel switch for your dash lights. Make sure that hasn't been rotated all the way down. ( note; when the dimmer wheel is turned all the way up that turns on all the courtesy lights inside the Explorer and they will stay on with the doors closed) Use the dimmer wheel to adjust the brightness of your gauge lighting.
The dash light dimmer switch is worn out. You need to replace it.