Including a series capacitor in the input and/or output circuit of the transistor. If the capacitor in the output circuit is omitted there will be a dc component in the output.
Transistor are DC output, Triac are AC output.
A load line is used in graphic analysis of circuits, having both linear and non-linear parts, representing the constraint the other parts of the circuit put on the non-linear transistor. It represents the response of the linear circuit connected to the transistor. The DC load line describes the DC operation of a transistor graphically.
the dc current gain of BC107 can vary from 110 to 450
Mostly for small dc motor, 2core are used. earthing can be achieved by grounding the chassis.
capacitors at input block dc and allows ac only. so absolute none of the dc enters the circuit. They are called decoupling capacitors or blocking caps. -DANNY S
Transistor are DC output, Triac are AC output.
yes...........
It depends on the total load of the transistor as to what the shape of the slope is for the DC load line. A transistor gains voltage as base current is allowed to flow.
transistor
The easiest way to convert the DC Voltage to pulse is simple astable multivibrator. This can be achieved either directly by astable multivibrator ic's or using normal transistor and resistor combination circuits or by using 555 as astable multivibrator.
A load line is used in graphic analysis of circuits, having both linear and non-linear parts, representing the constraint the other parts of the circuit put on the non-linear transistor. It represents the response of the linear circuit connected to the transistor. The DC load line describes the DC operation of a transistor graphically.
A: A transistor has voltage gain as base current is allow to flow. If the load is constant then a DC mirror azimuth path can be plotted as a function of base current and collector current and that is the load line
It doesn't.
in order to establish the Q-point of transistor
voltage regulator is a component to convert pulsating DC into constant DC.
The oscillator which is blocked by using transformer is called a blocking oscillator. Generally, the primary is given to the base and secondary is given to the collector of the transistor used in the oscillator circuit.
to establish Q- point or operating point...