It depends on the voltage applied it can be zero to a very finite value. by knowing current and using Boltzmann constant the impedance can be found.
Answer:
Typically: 700 Ohms when Forward Biased and >2000 Ohms when Reverse Biased.
B - Dynamic resistance
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
After isolating the diode from the circuit, the diode shows infinite resistance in one direction and low resistance in the other direction. The diode
The dynamic resistance of a diode, be it zener or otherwise, will be different from its static resistance because a diode is not a resistor, and resistance is not a function of current flow. It is a diode, and a diode has its own characteristic voltage to current curve, forward and, in the case of a zener, reverse.
yes, diode can be used as rectifier diode to convert ac to dc
B - Dynamic resistance
Forward Resistance:def: It is resistance offered by diode to the forward bias is known as forward resistance.This resistance is not the same for the flow of DC as for the changing current. Accordingly this resistance is of two types :1. DC FORWARD RESISTANCE.2. AC FORWARD RESISTANCE.1. DC forward resistance: It is the opposition by diode to the DC. It is measured by the ratio of DC voltages across the diode to the resulting DC current through it.2. AC forward resistance: It is the opposition offered by the diode to the changing current. It is measured by the ratio of change in voltage across diodes to the resulting change in current through diode. The AC forward resistance is more significant as the diodes are generally used with alternating voltage.Reverse Resistance:def: The resistance offered by the diode to the reverse bias is known as Reverse Resistance. It can be DC reverse resistance or AC reverse resistance depending upon whether the reverse bias is direct or changing voltage. Idealy the reverse resistance of a diode is infinte however in practice the reverse resistance is not infinite because for any value of reverse bias, there does exist a small leakage current. It may be emphasized their that reverse resistance is very large compared to the forward resistance.These Definitions are from PRINCIPLES OF ELECTRONICS by V.K MEHTA and ROHIT MEHTA
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
The static resistance which is calculated from the static ch. of doide is the dc resistance offered by the diode. dynamic ch. of the diode describes the diode's behavior when the applied voltage is fluctuating,or ac, thus the dynamic resistace is simply the ac resistance offered by the diode.akhil gopalpunnapra
Bulk resistance of diode depends on how it is biased. The bulk resistance of a diode is the approximate resistance of the diode when it is forward biased.
diodes follow an exponential curve meaning non linear in nature. by using Boltzmann formula an impedance can be calculated. That would be the AC Resistance the dc resistance on any device is the voltage drop divided by the dc current.
After isolating the diode from the circuit, the diode shows infinite resistance in one direction and low resistance in the other direction. The diode
A diode allows current to flow in only one direction. If the current is flowing, the diode has a low resistance and it behaves like a wire or a switch in the on position. If the voltage across the diode is reversed, no current flows and the diode has a very high resistance. It behaves like a switch in the off position. DC voltages are used to switch the diode on or off. The signal that is being switched is usually an AC audio or radio signal. Capacitors block DC but pass AC signals. By combining diodes and capacitors, the AC and DC signals are kept separate and the switch can be built.
The dynamic resistance of a diode, be it zener or otherwise, will be different from its static resistance because a diode is not a resistor, and resistance is not a function of current flow. It is a diode, and a diode has its own characteristic voltage to current curve, forward and, in the case of a zener, reverse.
no we not use resistance in place of diode.
yes, diode can be used as rectifier diode to convert ac to dc
Diode: Which allows power in one direction or which converts AC to dc . Converter: Which converts DC to DC