induction
The terms, 'lagging' and 'leading', describe the relationship between a circuit's load current and supply voltage. They describe whether the load current waveform is leading or lagging the supply voltage -always the current, never the voltage. Inductive loads always cause the current to lag the supply voltage, whereas capacitive loads always cause the current to lead the supply voltage.
EMG can determine whether a particular muscle is responding appropriately to stimulation, and whether a muscle remains inactive when not stimulated.
It depends on whether the field winding of the dc motor is connected in series or in shunt with the armature winding.If it is connected in series,the motor will rotate since the torque,which varies as the product of the armature and field current is always positive.Thus,a positive average torque causes the motor to rotate,however the pulsating nature may cause the commutator segments and brushes to wear out. Thus only small sized dc motors may be used with ac supply.
a) to act as a switching device; a change in the bias voltage at the base- emitter junction can cause an increase in signal flowing through the transistor through the collector terminal and this cause the output voltage at the collector terminal to change; eg to drop to a low voltage level, this is seen as the transistor device switching on to maximum conduction rate and a low level output at the collector. b) to act an amplifer . whether the input signal is an ac type signal in which case its a signal power amplifer function; eg sound amplifer control circuits , or whether a dc input signal, in which case the input dc signal is amplfied to be reproduced as a bigger signal at the output collector terminal
standardization is important because it helps to determine whether the machine is set and working properly or not.
Static electricity is a non contact force because : Whether an object is charged by conduction or induction or even by friction they acquire a charge and the objects acquire opposite charge in induction and friction but same charge in conduction. So when the charged body is brought near an uncharged body if they have opposite charge they will be attracted towards the charged body due to the movement of ionic particles.
Static electricity is a non contact force because : Whether an object is charged by conduction or induction or even by friction they acquire a charge and the objects acquire opposite charge in induction and friction but same charge in conduction. So when the charged body is brought near an uncharged body if they have opposite charge they will be attracted towards the charged body due to the movement of ionic particles.
Conduction occurs between two contacting objects, so whether or not they're in a vacuum is irrelevant.
They do not. Pots and pans need a specially made base for the induction cooking process.
an electroscope is used to determine whether an object is charged or not. However, it will not tell if the object is positively or negatively charged.
FIRST THING I WANT TO KNOW THAT WHETHER YOU ARE TALKING ABOUT INDUCTION MACHINE OR SYNCHRONOUS MACHINE? IN INDUCTION MACHINE, RATIO OF VOLTAGE TO FREQUENCY MUST BE SAME FOR CONSTANT TORQUE. IN THESE CASE AS YOU CAN SEE, V/f RATIO IS NOT CONSTANT THEN INDUCTION MOTOR WOULD NOT RUN.
by its properties.i.e whether a metal or any insulator
A jury of 12 to 23 persons convened in private session to evaluate accusations against persons charged with crime and to determine whether the evidence warrants a bill of indictment. Source: Answers.com
"Describe an experiment that would you to determine whether the deep purple portion of the leaf is photosynthesizing?"
It depends whether or not they broke anything after they got there!
YES of course you can whether your a parent or childcare worker.
It depends on whether you were charged with a felony or a misdemeanor.