Design and draw a combinational circuit using AND-OR-NOT gates that
accepts 4 input bits, and produces two bit output; the first of the two bits is set
to 1 if the number of 1's in the input is even; and the second of the output bit
is set to 1 if the input have 3 or more (all four) 1 bits.
An encoder is a digital circuit which accepts one of the inputs and converts it into BCD or Binary Coded Output. It performs the reverse function of that of a decoder.
Type AE and AQ accept bolt-on breakers, type AL accepts plug-in breakers.
If you are talking combinations, without binary number representations, then you are talking about a circuit that has a 1 output when any input is a 0. That is a 3 input NAND gate. If you are talking binary number representation, then you are talking about a circuit that has a 1 output when the inputs are 010, 001, or 000. Use a 3 to 8 decoder, with an OR gate on the low three outputs.
it is aa linear circuit that produces the output voltage from the fraction of its input. It is also known as potential divider.
There are two types of circuits: series, and parallel. In a series circuit, electricity flows through all components of the circuit in a series. This means it flows from the power source, through all the components as a whole, then back to the source. A parallel circuit, on the other hand has the electricity flow through the components separately. Power flows from the source to each individual component individually, then back to the source. In a series circuit, if one component is missing or broken, the circuit will not function. With a parallel circuit, on the other hand, if a part is missing, or broken, all the other components will still work.
Combinational chutiye
combinational circuit
hazards in combinational and sequential circuits
both combinational and sequential circuits have two inputs and outputs..!
combinational circuit is depend only on inputs,like sequential circuits its not depend on previous outputs.
combinational circuit and sequential circuit
it can be either, depending on parts used in the circuit and their connections.
In a combinational logic circuit, the output(s) depend only on the present values on the input, not on any previous values. In a sequential circuit, the output(s) also depend on the previous values. A sequential circuit must contain a memory element (at least one flip-flop) to hold the state of the circuit.
Some key differences between a Serial and Parallel Adder are that a Serial Adder is slower, a Parallel adder is a combinational circuit and the time required for addition depends on the number of bits in a Serial, but not a Parallel. A Serial Adder is a sequential circuit while a Parallel is a combinational circuit.
God only know :d
a sequential circuit is an interconnection of combinational circuit and storage elements.The storage elements is called flip-flop,store binary information that indicates the sequentiol circuit at that time.
acceptor circuit is the circuit which accepts only one frequency and reject the others