- Bit justification is needed in PDH - No would standards available at optical interface in PDH - line rates are not standard - Interfacing problem at multivendor equipment - PDH supports 16E1s and SDH supports 63E1s
nothing
The PDH interface standard is not uniform,there is 1.5Mbps and 2Mbps. The PDH system have not strong management function.
Alarms which are generated due to the failure of any link or card on the Sdh equipments are sdh alarms.
card slot- port- tug3
PDH stands for Plesiochronous Digital Hierarchy. It is a technology that is used in telecommunications networks to send large quantities of data over digital transport equipment, like fiber optic and microwave radio systems.
WHAT IS SDH
63
SDH = 3 times of SONET
SDH and PDH are two digital hierarchies in which different line speeds (e.g. E1, T1, STM1) are categorized.PDH (plesiosynchronous digital hierarchy) was replaced by SDH (synchronous digital hierarchy) due to its drawback in synchronisation where plesio refers to nearlysynchronous.E1, T1 and J1 are generally categorized under PDH. STM1, OC3, STM4, OC12 etc. are categorized under SDH.E1 is used worldwide nowadays in 2G technologies except North America and Japan (who are using T1 and J1 respectively). It is the line speed of 2Mbps. But how this speed comes along? The derivation is as follows.The audio signals were sampled and converted to digital signal at 64kbps, since 1960s for digital transmission of voice calls. When 32 channels (30 assigned for voice channels and 2 channels for framing and signaling), with each having speed of 64kbps are put together (or we call multiplexing), a line speed of E1, i.e. 2Mbps is produced by having 32 x 64kbps = 2.048Mbps.T1 line, which transmits at 1.544 Mbps can be interconnected with E1 for international use.Having 3 different speeds (E1, T1 and J1), PDH was later replaced by SDH in order to standardize the speed, making only 1 standard speed worldwide, which is STM1 having the speed of 155.52Mbps.
it uses a transport like pdh,sdh, there are PRC as a grand master and the network elements locked unto it. the synch can pass throught the clock
nothing
what are the bennefits of sdh? what are the bennefits of sdh? what are the bennefits of sdh? what are the bennefits of sdh? what are the bennefits of sdh?
Pyruvate dehydrogenase (PDH) are regulated by pyruvate dehydrogenase kinase (PDH-K) and PDH phosphatase. PDH-K effect on PDH is that it will inactivate PDH and PDH phosphatase will reactivate PDH. PDH-K is regulated by energy surpluses (ATP, NADH) and energy deficits (ADP, NAD). So when there is an energy surplus, PDH-K will inhibit PDH, and vice versa. PDH phosphatase will activate PDH and is upregulated by magnesium and calcium.
== == what is the difference between sdh wan and ethernet wan
SDH and PDH are two digital hierarchies in which different line speeds (e.g. E1, T1, STM1) are categorized.PDH (plesiosynchronous digital hierarchy) was replaced by SDH (synchronous digital hierarchy) due to its drawback in synchronisation where plesio refers to nearlysynchronous.E1, T1 and J1 are generally categorized under PDH. STM1, OC3, STM4, OC12 etc. are categorized under SDH.E1 is used worldwide nowadays in 2G technologies except North America and Japan (who are using T1 and J1 respectively). It is the line speed of 2Mbps. But how this speed comes along? The derivation is as follows.The audio signals were sampled and converted to digital signal at 64kbps, since 1960s for digital transmission of voice calls. When 32 channels (30 assigned for voice channels and 2 channels for framing and signaling), with each having speed of 64kbps are put together (or we call multiplexing), a line speed of E1, i.e. 2Mbps is produced by having 32 x 64kbps = 2.048Mbps.T1 line, which transmits at 1.544 Mbps can be interconnected with E1 for international use.Having 3 different speeds (E1, T1 and J1), PDH was later replaced by SDH in order to standardize the speed, making only 1 standard speed worldwide, which is STM1 having the speed of 155.52Mbps.
The PDH interface standard is not uniform,there is 1.5Mbps and 2Mbps. The PDH system have not strong management function.
Alarms which are generated due to the failure of any link or card on the Sdh equipments are sdh alarms.