The process in which electric current is produced when a spinning shaft rotates magnets inside a generator is referred to as 'Direct Current'. It is not expected to work by the normal standard physics model however some people claim it is just.
emf produced by generator(E)=no. of turns in coil*rate of change of magnetic flux
The rotor turns (rotates) causing magnetic fields to move across a coil of wire. This induces an electrical current in the wires of the coil.
Armature reaction is the interaction between the magnetic flux produced by armature current and that of the main magnetic field in an electric motor or generator.
It is a conductor, it conducts the electric current generated to the load that is being supplied with power.
Power = E I25,000 = 105 II = 25,000 / 105 = 238.1 Amp
direct current
To increase the amount of electric current produced by a generator, you can increase the rotational speed of the generator, increase the strength of the magnetic field within the generator, or increase the number of turns in the generator coils. These methods will result in a higher induced voltage and therefore a higher electric current output.
That would be an electric generator. They are also called dynamos. An alternator is a type of generator that makes alternating current.
A motor can be connected up to a car battery to store the power produced when it runs as a generator, but you will find that when current is drawn the motor needs more work to spin it, it will not spin so easily. That is because of conservation of energy.
Both a generator and an electromagnet involve the use of coils of wire with an electric current flowing through them. In a generator, the motion of the coil creates an electric current, while in an electromagnet, the electric current produces a magnetic field.
a generator
When a conductive loop is moved through a magnetic field, an electric current is produced in the wire loop. This is the basis of electrical generators.
The spinning magnet in generators.
Electricity from a simple generator is produced through the principle of electromagnetic induction. When a conductor, such as a wire coil, moves through a magnetic field, it generates an electric current. This current can then be harnessed to power electrical devices.
An electric generator produces electrical energy. It converts mechanical energy to electrical energy by interacting with a magnetic field. The amount of electrical energy converted to useful work in a given time interval is the power output. If the generator is not connected to any load, then no work is done and there is no power.
First ac has to be rectified into dc and then that could be stored in a secondary cell in the form of chemical energy.
The mechanical energy of turbines in a modern coal-fired electric plant is transformed into electrical energy by spinning a generator. The generator works by using the rotating motion to induce an electric current in coils of wire, in accordance with Faraday's law of electromagnetic induction. This current is then converted into usable electrical energy that can be distributed to power grids.