Loads or power-consuming devices are usually wired
Yes. This is usually an indication that either its current coil or its voltage coil has been wired incorrectly.
You likely wired it wrong. Not sure what you mean by "fizzle out".
Junction boxes are usually laid out so that the circuit splices are located in the basement and in the attic. Attic junction boxes have to have a vertical clearance of three feet above it to make it legal.
series
Is the receptacle a 110 or a 220 outlet? If it's a 110, it needs to be a 220. Are there other appliances, lights, etc. wired on the same outlet? If so, you may have to re-wire so that no other appliances, lights, etc. are wired into the same breaker. Usually the larger appliances such as air conditioners, central heat systems are wired to a separate breaker or fuse.
Loads or power consuming devices are usually wired?
if a light bulb is wired it lights if a motor is wired it turns
No. It is a DSL modem. This usually will accommodate one wired connection, and would require a router (wireless or otherwise) to connect multiple devices.
Usually with an ethernet cable
Wired media are forms of wired communication in which all is transmitted via a wired as opposed to wireless connections. Cable television, wired telephone networks and fiber optics are all considered wired communications. Even wireless devices like mobile phones, the internet and satellite communications still need to rely on wired communications.
They are wired in parallel, series and series - parallel.
a compound circuit involves a source a switch and 3+ loads. two of the loads are wired in parallel with a single load connected to the source and top or bottom of the two parallels.
A 4G router with Ethernet can be used to provide a wired internet connection to devices that support Ethernet connectivity. The router connects to the 4G cellular network and converts the cellular data into an Ethernet signal that can be transmitted over a wired connection. This can be useful in situations where a wired connection is preferred or required, such as for gaming devices or network-attached storage devices. Additionally, it can also be useful for providing internet access in areas where wired infrastructure is not available, or as a backup internet connection for businesses.
series circuits have the load wired one after the other parallel circuits have the loads wired on different branches-the advantage being if a bulb breaks, or another component, the others still have current flowing through them
Yes, and you can connect many more devices. The router should have at least 4 ethernet ports to connect to. And/or you can connect wireless also. If you have more then 4 wired devices then you can use a 4, 8, or 16 port ethernet Switch to connect to the Router. Myself I have 3 desktops (wired), 3 wireless and 1 wired laptops, an X-Box 360 (wired), a Wii (wireless), a BlueRay player (wireless) and a Brother laser printer (wireless) connected to the router. (1 desktop, 1 laptop and the X-Box are hooked to the Router and the rest of the wired devices are connected to an 8 port ethernet Switch which is connected to the Router.)
A WAN or wide area network connects devices over several platforms. It can be wireless or wired or both.
Under most circumstances, there would be no need to do this. All wireless routers have plugs in the back of them to hook up wired devices which can be used in conjunction with the wireless signal.