answersLogoWhite

0

If your thermostat is designed to switch the fan on and off at say 120 volts, then it acts just like a switch. This means that you insert the two wires from the thermostat in series with the black wire going to the fan. So let's say you have a supply of power for fan that has black, white and bare wire ground. You connect the white to white on fan and ground to ground. You then connect one wire of the thermostat switch to supply black and one to fan black wire. If you are unsure of the type of thermostat or anything else get an electrician. This is just one possible solution given the information provided.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Do you need 3-wire romex to feed bedroom ceiling box by electrical code?

No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.


How do you fix an electric baseboard heater?

first of all you buy a double pole unit thermostat which should come with the mounting plate and thermostat and it should have 4 wires 2 red 2 black okay now you join the red to the red power wire and black to the black power wire and the 2 remaining wires which should be a red and black can be joined to the red and black wires on your heater .....now you should be good to go ............LEE48


Im adding a new ceiling fan in my living room i pulled the old fixture down i noticed 2 sets of 3 wire BWR and 1 set 2 wire BW BW going to the wall switch how should you wire in the fan?

White is for neutral on the fan, black is power for the motor, and red is power for the light. If the power from the switch only has two wires (black and white), you would hook up white to white and hook black and red from the fan to the black wire from the wall switch. This means that you'll be powering the fan and light on the same switch and to change the fan and light separately you will have to pull on the chains or use a remote control.


Is it all right to cover electric wires with insulation in attic?

Yes as long as they are in a romex style wire. Like 12-2 for example. Which is individual wires incased in an outer jacket. You should never have just single wires running in the attic unprotected or anywhere for that matter. Individual wires must be in a conduit. And any splices should be in a box.


What is the difference between 12-2 and 14-2 wiring?

The '12' and '14' refers to the gauge of the wire. A 14 gauge wire is used for circuits drawing 15 amps or less; general lighting and outlets. A 12 gauge wire is used for 20 amp circuits, like dishwashers, disposals, and microwaves. The '-2' refers to the number of conductors in the wire. 14-2 is a 14 gauge wire with 2 conductors in the sheath. A 14-3 with ground would have three conductors plus a ground in the sheath, for a total of four wires, and is most often used for ceiling fan wiring and three way switches.

Related Questions

What is the 2 wire thermostat wiring diagram for a specific model of thermostat?

The 2 wire thermostat wiring diagram for a specific model of thermostat typically involves connecting one wire to the R terminal and the other wire to the W terminal on the thermostat. This allows the thermostat to control the heating system.


What is the 2 wire thermostat wiring diagram for heat only systems?

In a 2-wire thermostat wiring diagram for heat-only systems, one wire connects to the R terminal on the thermostat and the other wire connects to the W terminal. This setup allows the thermostat to control the heating system by sending signals to turn it on or off.


What turns on the cooling fan 1993 3.0 v6 Dodge Shadow?

The computer reads the temperature from the 2 wire sensor next to the thermostat. It then actuates a relay on the inner fender and turns on the fan. [edit] most 3.0 V6 only have a 1 wire sensor.


How can I properly connect a thermostat with only 2 wires in the wiring setup?

To properly connect a thermostat with only 2 wires in the wiring setup, you will need to identify the two wires, typically labeled as R and W. The R wire is the power wire, and the W wire is the heating wire. Connect the R wire to the R terminal on the thermostat and the W wire to the W terminal. Make sure the thermostat is compatible with a 2-wire setup and follow the manufacturer's instructions for proper installation.


How to wire a ceiling fan with only 2 wires?

To wire a ceiling fan with only 2 wires, you will need to connect the black wire from the fan to the hot wire in the ceiling, and the white wire from the fan to the neutral wire in the ceiling. Make sure to turn off the power before starting the installation.


Can you connect a 3 wire fan into a 2 wire supply?

Yes, you can connect a 3-wire fan to a 2-wire supply, but you will lose the functionality of one of the wires. Typically, the third wire on a fan is used for speed control or monitoring purposes. If you connect a 3-wire fan to a 2-wire supply, the fan will run at full speed without the ability to adjust it.


What is the correct way to install a thermostat using a 2-wire system according to the thermostat wiring diagram?

To install a thermostat using a 2-wire system according to the wiring diagram, you should connect one wire to the "R" terminal and the other wire to the "W" terminal on the thermostat. Make sure to follow the manufacturer's instructions carefully to ensure proper installation.


How do I properly wire a 2 stage thermostat for my heating and cooling system?

To properly wire a 2-stage thermostat for your heating and cooling system, you will need to connect the wires from the thermostat to the corresponding terminals on your HVAC system. Make sure to follow the wiring diagram provided by the thermostat manufacturer and consult a professional if you are unsure.


What is the 2 wire ceiling fan wiring diagram for installation?

The 2 wire ceiling fan wiring diagram for installation involves connecting the black wire from the ceiling fan to the black wire from the ceiling, and the white wire from the fan to the white wire from the ceiling. The green or bare copper wire is connected to the grounding screw on the mounting bracket. Make sure to follow the manufacturer's instructions and turn off the power before starting the installation.


Where does the red wire in a baseboard heater connect to the black or white wire in the wall?

In the heater you will have two wires. You should then have 2 supply wires from the panel, and 2 wires from the thermostat. The neutral (white) supply wire should go to one of the wires on the heater. The hot (black) supply wire should connect to one wire from the thermostat. The other wire from the thermostat will connect to the other wire from the heater.


How do you change a 3 wire cealing fan circuit to a 2 wire light circuit?

Sure; the fan has 3 wires so you can wire the light and fan separately, but if you don't have that option, you don't NEED to put the fan and the light on separate switches. You can always turn the light or fan on/off using the pull strings.


Do you need 3-wire romex to feed bedroom ceiling box by electrical code?

No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.