answersLogoWhite

0

A: ascertain the polarity of the ohmmeter leads as + - potential available then set the scale to kilo ohms and see if the reading is hi [ is the + lead is + then that imply that the diode is + to the cathode] therefore is not conducting. reverse the diode and the reading should be low implying anode is positive and the diode is conducting

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

The terminals of a diode are called the?

anode positive potential cathode negative potential


How do you check a diode?

the diode will have two polarities anode and cathode .take multimeter and set it in buzer mode or resistance mode and connect the positive terminal of multimeter to anode of diode and negative to the cathode the multimeter shows the resistance say 500-700ohms if it working and doesn't show any impedance i.e, very high impedance in reverse bias i.e, by connecting the positive terminal of multimeter to cathode of diode and negative terminal to anode,and in no working condition it shows same characteristics as in reverse bias connected. the simple way of checking diode is connect the 2v led in series with the diode to the battery of 3v the led will glow if the diode is connected in forward bias in circuit and it doesn't glow if the diode is connected in reverse bias in circuit /diode is damaged . A: a diode will conduct from cathode [negative ] to anode [positive] A stripe at one end is the cathode or a stripe on the arrow is the cathode. By applying the proper voltage it will conduct and show low resistance and a voltage from .6v to .7v. Reversing the lead it will show relatively hi resistance.


What is the purpose of an cathode and an anode in a diode?

The cathode and anode are simply two terminals of a semi-conductor junction. In a normal diode, forward bias occurs when the anode is more positive than the cathode.


What is the direction of current flow in a diode valve?

Inside the diode valve the conventional curret flow is from anode to cathode. The electron flow is from cathode to anode.


How many terminals does a diode have?

two, cathode & anode


A diode conducts only when it is?

a diode will conduct when anode is more positive than the cathode


What are the two leads on a diode called?

The two leads on a diode are called the anode and the cathode.


How to test an LED light with a multimeter?

To test an LED light with a multimeter, set the multimeter to the diode testing mode. Connect the positive lead of the multimeter to the anode of the LED and the negative lead to the cathode. If the LED is working, the multimeter will display a voltage drop. If there is no voltage drop, the LED may be faulty.


A diode does what?

A diode is a semiconductor meaning it will conduct from anode to cathode if the anode is held positive. Reversing the polarity Will in effect block current flow.


What does diode do?

A diode is a semiconductor meaning it will conduct from anode to cathode if the anode is held positive. Reversing the polarity Will in effect block current flow.


When a 10mA forward bias current and the voltages at the anode and cathode of a diode in a circuit are found to be the same what is the diode most likely to be?

With a 10mA forward bias current, if the voltages at the anode and cathode of a diode in a circuit are found to be the same, then the diode most likely to be shorted.


What is the left leg of the led called?

Cathode and an anodeThey are called the "anode" and the "cathode", just like every other diode ever built.