The auxiliary contact is to be utilized for interlocking of another relay or contactor or indication signal from another equipment.
Power contactors are used primarily for more sophisticated equipment that need several different points of contact. Auxiliary contactors are primarily for single connections.
The relay is used to "interlock" a circuit. It consists of a coil and a number of auxiliary "normally open" or "normally closed" contacts. A limiting condition is wired through the coil contacts and resulting conditions are wired through the auxiliary contacts. When the limiting condition is met, the coil will pull in and change the state of the auxiliary contacts. For example, if you want a lamp (lamp 1) to turn off when a second lamp (lamp 2) is turned on, lamp 1 would be wired through a "normally closed" set of contacts and lamp 2 would be wired through the coil contacts. When lamp 2 is turned on, the coil will pull in and open the "normally closed" contact for lamp 1, turning it off.
I think aux relay is part of relay
To differentiate it from the main winding and to make the path of the current different.
auxiliary transformer is used to supply low voltage for AC power system inside substation such as lighting ,air conditioners and other AC supply system and DC power system such as protection relays, batteries, SCADA & telecom system and other DC supply system
The main contact controls the load current to the motor, whereas the auxiliary contact is part of the control circuit -usually connected in parallel with the 'on' pushbutton switch to maintain the control circuit in the energised state, once the on pushbutton has been pressed.
De-energize it and note the position of the contacts.
You need to be more specific. Do you want a contact telling you if a circuit breaker is on? If that is your question, the answer depends on the model of the breaker.
Power contactors are used primarily for more sophisticated equipment that need several different points of contact. Auxiliary contactors are primarily for single connections.
we need a form for a fire company auxiliary new members also what are the duties of a auxiliary can they also work for the community.
Auxiliary lifts would be exercises such as side bends and L-flyes that primarily work stabilizing muscles. They are important for injury prevention.
An auxiliary boiler is a secondary boiler used to support the main boiler in a steam power plant or marine vessel. It is often used when the main boiler is unable to meet the steam demands, providing additional steam capacity. Auxiliary boilers can also be used for heating purposes during maintenance or downtime of the main boiler.
"Can" is considered a modal auxiliary verb in English. It is used to express ability, possibility, or permission, and is often used with another main verb to form a complete verb phrase.
There are three main parts of a magnetic contactor. These include the power contacts, contact springs, and the auxiliary contacts.
Contactors have both power and auxiliary contacts. We use the auxiliary contact to control magnetic system of contactor. When a heater , relay or a key warn the contactor it is energized and by the typical magnetic interaction it opens its closed power contacts.
Probably a blown fuse. Check the fuses.
Auxiliary sound refers to auxiliary interface connector where one can connect external sound devices.