answersLogoWhite

0

It keeps a potentially lethal amperage from going through your body.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Why the size of a fuse holder increase as the rating of a fuse?

As a general rule, the larger the current rating of the fuse, the larger will be the fuse holder (or at least the metal contacts) because it will have to be capable of handling larger currents without overheating.


Why is a fuse important?

a fuse is important because if there is a overload of energy the fuse will take it in and if the fuse blows it means there is a problem or a thecnical problem with that source. a fuse can be found in a series circuit.


What does fuse tester do?

A fuse tester is a device used to check the functionality of fuses in electrical circuits. It determines whether a fuse is intact or blown by applying a small voltage across the fuse. If the fuse is good, it allows current to flow; if it’s blown, the tester will indicate a failure, helping to identify electrical issues quickly and efficiently. This tool is essential for ensuring safety and proper functioning in electrical systems.


Is a 35 amp fuse a standard size?

A 35 amp fuse is not a standard size in most electrical systems, as standard fuse ratings typically include values like 5, 10, 15, 20, 30, and 40 amps. However, a 35 amp fuse may be used in specific applications or equipment where that amperage is required. It's essential to always use the fuse rating specified by the manufacturer for safety and proper operation.


Which electrical safety device melts easily during a short circuit or overload?

You're talking about a "fuse". The fuse doesn't know anything about "short circuit" or "overload". It only knows that the current through it has exceeded its rated value, but nothing about how or why that occurred.

Related Questions

Why does a plug need fuse in it?

The fuse is a safety feature.


How does a fuse help safety?

A fuse is a safety device that helps prevent excess current flowing in an electric circuit.


Why does a plug need fuse?

A fuse is fitted to a plug as a safety feature.


Which safety device will melt if the current is too big?

This safety device is called a fusible link that is situated inside of a fuse cartridge.


Where sensors incorporated into the design to increase safety?

were sensor incorporated into the designs to increase safety mind


What will happen to a safety device if there is short circiut?

If your reference to a safety device is a fuse, then if there is a short circuit, the circuit will be de energized by the opening of the fuse.


Can you use a 32V 15A fuse if the appliance calls for a 125V 15A fuse?

No, you should not use a 32V 15A fuse in an appliance that requires a 125V 15A fuse. The voltage rating of the fuse is important for safety, and using a lower voltage fuse can result in the fuse not providing adequate protection and potentially causing a safety hazard. Always use the recommended fuse rating for your appliance.


Where is the neutral safety switch located on a 2004 Envoy?

The neutral safety switch is located, on your 2004 Chevrolet envoy, on the side of the transmission next to the shifting linkage. The safety switch also has a fuse in the fuse box.


Where can you find the fuse for the shifter safety switch?

The fuse for the shifter safety switch is typically located in the vehicle's fuse box, which can usually be found under the dashboard on the driver's side or in the engine compartment. You may need to consult the vehicle's owner manual for the exact location of the fuse box and the specific fuse related to the shifter safety switch. Additionally, it's a good idea to check the fuse diagram often found on the inside cover of the fuse box for identification.


When connecting a safety fuse in a circuit connect it to what?

When connecting a safety fuse in a circuit, it should be connected in series with the load it is protecting. This ensures that if the current exceeds the fuse's rating, the fuse will blow and interrupt the circuit, preventing potential damage or hazards. Always ensure the fuse is rated appropriately for the circuit to ensure proper protection.


Why should a fuse of defined rating not be replaced with one with larger rating?

The fuse is rated to protect the equipment, the supply, and you. Change the fuse for a higher rating and you compromise your safety and equipment and supply safety; increasing the risk of electric shock and of fire.


Safety feature important in preventing the overheating of wiring?

Fuse