The zener diode protects the meter by stabilizing the voltage when it goes in to the breakdown region.
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
A zener diode cannot be used as switch.
That depends on the zener voltage rating:"low voltage" zeners are just a simple single diode, the zener diode"high voltage" zeners contain 2 back to back diodes in one package, the zener diode and an ordinary diode that is reverse biased when the zener diode is forward biased to block forward conduction of the zener and protect it from overcurrent damage if installed backwards by mistakeThus in "low voltage" zeners when forward biased they will have a normal diode drop (e.g. 0.7V), but "high voltage" zeners when "forward biased" they will act open due to the reverse biased blocking/protection diode in series with the zener.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
Zener diode is heavily doped pn junction diode.
A: A zener is a diode that if reversed voltage is applied will conduct at a certain voltage. This diode zener therefore will conduct at a preset voltage limiting the over voltage to the diode conducting voltage and no more so the load can see the voltage up to the zener voltage and no more because the zener will sink the extra current from over voltage situation.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
A zener diode cannot be used as switch.
Dr. Clarence Melvin Zener of Southern Illinois University invented the zener diode.
That depends on the zener voltage rating:"low voltage" zeners are just a simple single diode, the zener diode"high voltage" zeners contain 2 back to back diodes in one package, the zener diode and an ordinary diode that is reverse biased when the zener diode is forward biased to block forward conduction of the zener and protect it from overcurrent damage if installed backwards by mistakeThus in "low voltage" zeners when forward biased they will have a normal diode drop (e.g. 0.7V), but "high voltage" zeners when "forward biased" they will act open due to the reverse biased blocking/protection diode in series with the zener.
zener diode is a revers bias diode which used for voltage regulation.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.
Since they are in parallel, the 3.3V zener diode will "kick in" first when you reach 3.3V, and the circuit will pretty much act the same as if the 7V zener diode isn't there at all.