An insulator is used to protect people from being electrocuted by the live wire. Most commonly used insulators are plastic or rubber.
A bushing is a hollow insulator, used with transformers and circuit breakers. It provides a means by which an energised conductor can pass from the outside to the inside of the transformer or circuit breaker.
yes, its an insulator. its a type of insulator used for wires, cables, etc
A candle in not in the electrical classification category as being used for an insulator.
Very low. It's used as an insulator.
Wood is an insulator.
An insulator is used to protect people from being electrocuted by the live wire. Most commonly used insulators are plastic or rubber.
an insulator
An insulator is used in a circuit to prevent electricity from flowing where it shouldn't, ensuring that current flows only through the intended path. Insulators are typically placed around conductive materials or components to maintain the desired circuit layout and prevent short-circuits or other electrical issues.
An insulator.
It protects us from electric shocks.
Insulator
A resistor is a component that limits the flow of electric current in a circuit, while an insulator is a material that restricts the flow of electricity. Resistors are used to control the amount of current in a circuit, whereas insulators are used to prevent the flow of electricity altogether.
A bushing is a hollow insulator, used with transformers and circuit breakers. It provides a means by which an energised conductor can pass from the outside to the inside of the transformer or circuit breaker.
Well, if you have a functioning (=closed) circuit, and introduce an unknown object, then if the circuit is still functioning (=closed) then the object is a conductor. If it stops working, then it's either an insulator or an very poor conductor.
No paper is an insulator.
If an insulator with a lamp is connected in an electrical circuit and the switch is turned on, the lamp will not light up. Insulators do not allow the flow of electric current, so the circuit will not be completed, and no electricity will reach the lamp to cause it to light up.
Yes, depending on how you build it.