answersLogoWhite

0

What else can I help you with?

Continue Learning about Electrical Engineering

What is the concept of resistor tolerance and its importance?

Resistor tolerance is how accurate the resistor value is. You may have a 10% tolerance, 820 ohm resistor, which means the actual value of resistance is 820 ohms +/- 82 ohms. If you design a circuit that has very stringent requirements for resistor values, you may need to purchase a resistor that has a smaller tolerance (like 5, 2, 1, .5%). The smaller the tolerance, the more expensive it will be (generally).


What is the purpose of specifying the tolerance of a resistor?

on electronic components, of course, can not be made absolutely perfect. so there must be imperfections in the making, it is called tolerance. for ex: 100ohm resistor ,a tolerance of 5%, meaning the resistance between 95-105ohm (100ohm * + / -5%). not fit 100ohm.


A resistor is marked with the following color bands brown black red and gold What is the resistance of this resistor?

The color bands on a resistor represent the resistor's resistance value. In this case, the colors brown, black, red, and gold correspond to the digits 1, 0, 2, and a multiplier of 10%, respectively. Therefore, the resistance of this resistor can be calculated as 10 * 10^2 ohms, which equals 1000 ohms or 1 kiloohm.


What the function of tolerance for resistor colour code?

Tolerance indicates how much the measured value of a resistance is different from its theoretical value, and it is calculated using percentages.


When 10 ohm resistor and 100 mega ohm resistor are connected in series then what will be the combined resistance?

100 megohm the 10 ohms completely vanishes in the tolerance of the 100 megohm resistor, in that range tolerances can exceed 20% of nominal.

Related Questions

What is the concept of resistor tolerance and its importance?

Resistor tolerance is how accurate the resistor value is. You may have a 10% tolerance, 820 ohm resistor, which means the actual value of resistance is 820 ohms +/- 82 ohms. If you design a circuit that has very stringent requirements for resistor values, you may need to purchase a resistor that has a smaller tolerance (like 5, 2, 1, .5%). The smaller the tolerance, the more expensive it will be (generally).


How do you get minimum and maximum value of resistor?

The minimum and maximum possible value is defined by the tolerance. To calculate the range of the resistor, simply add or remove the amount of the tolerance. For example, a 100Kohm resistor with 5% tolerance can range from 95Kohm through until 105Kohm. The lower the tolerance, the more accurate the resistor is.


Tolerance of a resistor marked 2K2M?

20%


What is the resistor E12 series?

10% tolerance.


How tolerance is expressed?

Percent


What is the upper control limit of a 1 ohm resistor with a 20 percent tolerance?

A 1 ohm 20% tolerance resistor should not exceed 1.2 ohms actual resistance.


What do the colours on resistor mean?

The colored bands on a resistor represent the resistor value and tolerance. The first two bands indicate the significant digits of the resistance value, the third band represents the multiplier, and the fourth band (if present) indicates the tolerance of the resistor. By decoding these colors, you can determine the resistance value of the resistor.


Is the tolerance range for a 2600-ohm resistor with a tolerance of 15 percent 2210w-2990w?

Yes, that looks right.


What is the resistance value and tolerance of a resistor with Brown Green Red Silver?

15 k ohms with a 10% tolerance.


A resistor of 10k ohms resistance with tolerance of 5 percent is connected in parallel with another resistor of 5k ohms resistance and 10 percent tolerance.what is tolerance limit of parallel network?

6.67%


How do you calculate percentage error of a resister?

You don't, you read the tolerance markings. If you measure the resistor and it is outside the marked tolerance it is bad.


What is the purpose of specifying the tolerance of a resistor?

on electronic components, of course, can not be made absolutely perfect. so there must be imperfections in the making, it is called tolerance. for ex: 100ohm resistor ,a tolerance of 5%, meaning the resistance between 95-105ohm (100ohm * + / -5%). not fit 100ohm.