One horsepower electric is 746 watts, so 30 horsepower is 22.4 KW. You don't specify the power factor or motor efficiency, so I am going to assume a power factor of 0.92 and an efficiency of 0.97, fair values for a 30 horsepower motor. Divide 22.4 KW by 0.92 and then by 0.97 and you get 25.1 KVA. Divide that by three and you get 8.4 KVA per winding. You don't say if the motor is delta or wye connected, so I'm going to assume delta, and multiply by the square root of 3 (1.732) to get 14.5 KVA per phase.
The amperage of a motor is governed by the voltage that the motor operates on. Without a voltage given, an answer can not be given.
I HAVE A SMALL ELECTRIC CLOCK MOTOR THAT I NEED TO REVERSE. WHAT IS THE CIRCUIT I NEED TO REVERSE IT?
This formula will give you the amperage I = kw x 1000/1.73 x E x pf (pf = power factor). Take the amperage and multiply it by 125%. This will give you the breaker size that you need.
To do a motor solo run test you need to connect the motor to a power supply. Next, you observe the motor's vibration, temperature, and sounds.
There is no need. The three-phase supply provides a rotating field in the motor, rotating in the right direction, so there is no need for a starting capacitor.
depending on 1phase or 3phase voltage motor , the amphere requirement is found outfor 3phase AC motor use this formula: (HP x 746)/(1.73 x E x Eff x PF)for 1phase AC motor : (HP x 746) / (E x Eff x PF)
There are many different 'run' capacitors on motors. It depends on the motor make and use. You need to consult your manual or local electric motor shop.See related links below for good information on how capacitors effect motor starting.
This wouldn't be on a farm would it? 1000' line would need it's own utility pole, and transformer.
75 kw motor
Transmission mounts are they considered motor mounts? After saying that how many motor mounts do I need to replace, if I change out all of them.
Need to know the voltage of the motor.
There are many electric motors on a Lincoln, need to know the year and which electric motor you are looking for.
five
The amperage of a motor is governed by the voltage that the motor operates on. Without a voltage given, an answer can not be given.
Need to know the year. they are all different.
if you go into an active blueprint and select tune car then you can do just that but the most useful thing is to tune everything in your engine on full it can add about 30hp+ to your car
1500 chervrolet truck need a motor