120 v
The secondary (output) voltage is determined by the primary voltage and the turns ratio of the transformer. The secondary current is determined by the secondary voltage and the load resistance.
3
There would be no rectified output. The transformer primary has to be closed to induce a current into the secondary winding. At this point of the secondary the voltage is still AC. This voltage is then applied to the rectification bridge to change it to DC. So you can see how no voltage on the primary, the same as the unit being unplugged, affects the output voltage.
It is a Step-Up Transformer which has 2 times voltage in secondary(HV) than primary(LV)
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
The secondary (output) voltage is determined by the primary voltage and the turns ratio of the transformer. The secondary current is determined by the secondary voltage and the load resistance.
Voltage doesn't 'pass through' anything! Voltage is another word for 'potential difference', and is measured between two points in a circuit. For a transformer to work, it's necessary to apply an a.c. voltage across the transformer's primary terminals.
A 'step-up' transformer is a transformer with more turns on its secondary winding than on its primary winding. It's secondary (output) voltage is, therefore, higher than its primary (input) voltage.
3
There would be no rectified output. The transformer primary has to be closed to induce a current into the secondary winding. At this point of the secondary the voltage is still AC. This voltage is then applied to the rectification bridge to change it to DC. So you can see how no voltage on the primary, the same as the unit being unplugged, affects the output voltage.
It is a Step-Up Transformer which has 2 times voltage in secondary(HV) than primary(LV)
The 'input' side of a transformer is called its 'primary' side, whereas the 'output' side is termed its 'secondary' side. The ratio of its secondary to primary voltage is equal to the ratio of the number of turns in the secondary windings to the number of turns in the primary winding. So if, for example, a transformer's secondary winding has twice as many turns as its primary winding, then the secondary winding will produce twice the voltage applied to the primary winding.
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
A transformer output voltage will be zero when A. The input voltage is zero. B. When the primary (input) wire winding inside the transformer is broken, cut, or burnt out. C. When the secondary (output) wire winding is broken, cut, or burnt out.
A transformer is an AC device in that it requires a changing current to be input in order to see an output. Attaching a 12V battery to the primary side of the transformer will generate a voltage on the secondary for a short amount of time. Once the primary current has risen to a stable level, there will be no output voltage on the secondary. There will also be voltages on the secondary and the primary when the battery is disconnected from the transformer. A flyback transformer relies on an AC current at the primary to generate a high voltage at the secondary output. Circuitry to make changes to the primary current will be needed in addition to the battery. Warning: removing the battery from the primary winding of the transformer is liable to generate a very high voltage across the primary coil as well as the secondary. In some cases, they can be lethal. Do not experiment with transformers unless you are properly qualified and supervised.
The primary coil is the one with voltage applied, or the 'input'. The secondary coil is the one in which a voltage is induced by electromagnetism, or the 'output'. In a step up transformer, the secondary coil voltage is higher than the primary. In a step down transformer, the secondary coil voltage is lower than the primary. In an isolation transformer, the secondary coil voltage is the same as the primary. Here, the point of the transformer isn't to raise or lower voltage, but to keep a particular circuit electrically disconnected from another circuit, while still allowing the circuits to function together (through electromagnetism).
The input voltage (primary) and output (secondary) of a transformer is determined by the manufacturer. Transformers are bought to accommodate the voltage that is needed on the primary side and to what voltage is needed on the secondary side.