Are you planning to build a perpetual motion machine in which the power generated by an AC generator is used to run an AC motor which is used to run the same AC generator which provides it with power? Because that won't work. Yes, you can use a motor to generate electricity, and you can use electricity to run a motor, but the process is not 100% efficient and if you try to make it a closed loop, it will run down fairly quickly. So, what do we actually do? We use fuel to run an AC generator, or we use waterfalls or wind, or some other energy source, and then we use the power to run our motor.
because working principle of both the things are same.The motor converts electrical energy in to mechanical via magnetic induction and generator do the exact opposite of this.And yes,you should use 'electricity generator' not only 'generator'.
A brush-less DC motor (BLDC)
you can use switching devices and get almost as good results as a motor generator set
It is the process of conversion of generated ac voltage into the armature of a dc generator to dc voltage at the terminal of the dc generator by use of pair of brushes and commutator. OR It is the process of conversion of given dc voltage at the terminal of the dc motor to ac voltage in the armature windings in a dc motor by use of pair of brushes and commutator.
One could but there would be additional losses. Older frequency changers use a synchronous motor to turn a synchronous generator with a different number of poles to change frequency. I have seen these used in woodworking. An example is to use a two pole motor to turn a four pole generator to generate power at twice the line frequency. A More modern solution would be to use semiconductors which would also allow the output frequency to be varied.
A DC motor converts electrical energy to mechanical energy. The converted energy is provided to a mechanical load.A DC generator converts mechanical energy to electrical energy. The converted energy is provided to the electrical load (voltage, current referring load).A DC motor can be used as a DC generator and vice-versa.
no
no
You can't use a motor to power a generator and use the output of that generator to power the motor. Some energy will be lost at each step making the hookup pointless. But you can use a combustion engine to power an electric generator and use that electricity to power auxillary systems around the engine.
Yes you can turn a motor into a generator, if it is a permanent magnet motor.
Generator coils generate the voltage, motor coils use the generated voltage.
because working principle of both the things are same.The motor converts electrical energy in to mechanical via magnetic induction and generator do the exact opposite of this.And yes,you should use 'electricity generator' not only 'generator'.
Yes. You can run it backwards, spin the rotor of the motor and take electricity out.
A brush-less DC motor (BLDC)
If I'm understanding the question, you are proposing using one motor and one generator, and have the motor spin the generator up to speed, and have the generator attempt to supply power to the motor. The answer is yes, you can do this, but you will be losing energy, not gaining it. The motor and generator's efficiencies are less than 100%, so once you remove the outside source they will slow down until they come to a complete stope, without any other load connected other than themselves.
form_title= Generators for Home Use form_header= Keep power running with a generator. Have you ever owned a generator?*= () Yes () No What is your budget for a generator?*= _ [50] What size motor would you like for the generator?*= _ [50]
yes you can use a dish washer by yourself or with and adult.