Yes, the green conductor is the colour of the ground wire in an extension cord. The black wire is dedicated to be the "hot" and the white conductor is the neutral.
You can rewire your extension cord by replacing the existing wire with green, black and white wires. In most situations it is safer and cheaper to buy a new extention cord.
Depending on the configuration of the cord cap, the green wire is ground, the white wire is the neutral and red and black wires are the 220 volt source.
When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
Black is the hot side of the line, white the neutral side, green (or rarely bare) wire is the ground.
You can rewire your extension cord by replacing the existing wire with green, black and white wires. In most situations it is safer and cheaper to buy a new extention cord.
I need an extension cord for my radio, because its cord is not long enough.
an extention cord...
Depending on the configuration of the cord cap, the green wire is ground, the white wire is the neutral and red and black wires are the 220 volt source.
When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
To answer this question more information is needed. The wire size of the extention cord is needed.
filium terminale
First off, it is not a 3-phase range. It is a single phase 110/220V range with a cord lacking a ground pin. Also, it is not a 4 phase outlet. It is a modern 110/220V outlet with a ground pin. To upgrade your range, go th the hardware store and buy a new 4-prong 50A 110/220V cord with a ground. Remove the old cord, and wire in the new cord. If the old cord was flat without a color code, the two outside wires are the hots (red and black on the new cord) and the center wire is neutral (white on the new cord). If the neurtal lug is bonded to the chassis, break the bond. The green wire in the new cord grounds the chassis. Connect the green wire to a convient screw in the chassis, if a dedicated green ground screw is not provided.
in the trunk on the left side next to the fuel door release cord it should be a green bolt
You can get an electric shock from an extension cord if it is damaged, frayed, or improperly used. Extension cords are designed to carry electrical currents safely, but misuse can increase the risk of electric shock. It's important to inspect extension cords regularly and use them according to manufacturer guidelines.
All four wires in a USB cord stand for different things depending on the type. The standard has green (data negative), white (data positive), black (negative), and red (positive) cord strands. There is another that has orange (5 volts), blue (data negative), green (data positive), and white (ground) cord strands.