The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral
I do not know what you mean by long slot. The bare ground copper wire connects to the green screw or the ground screw. The black wire attaches to the copper or gold colored screw and the white wire connects to the silver or chrome screw. Both the gold and silver screws are on the side of the outlet. The ground screw will be on one end of the outlet.
In typical American wiring the black wire on an outlet goes to the gold (copper) screw and the white wire goes to the silver screw. The ground wire goes to the green screw.
On a 110 volt circuit, Black is hot, White is neutral, Green or bare Copper is ground. . Connect Black to the gold screw, White to the silver screw, and bare copper ground to the Green ground screw on the receptacle. On a 220 Volt circuit Black & Red are both hot, each carrying 110 volts for a total of 220. White is Neutral and ground is Green or bare copper.
Power into the first outlet and out to all other outlets, black to gold and white to silver screw, ground wires to ground screw. From the outlet closest to the light switch run power from that outlet up to the switch box. Run another wire from the switch box up to the light. In the switch box tie all the whites together under a wire nut and push them back into the box. Tie all the ground wires together and connect that to the ground screw on the switch. Connect the 2 black wires you have left to the 2 screws on the switch. Does not matter which if you only have power in and power out to the light.
The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral
Yes, typically the black wire is connected to the gold screw (hot) and the white wire is connected to the silver screw (neutral) on a light fixture. It is important to ensure that the power is turned off before making any connections for safety.
I do not know what you mean by long slot. The bare ground copper wire connects to the green screw or the ground screw. The black wire attaches to the copper or gold colored screw and the white wire connects to the silver or chrome screw. Both the gold and silver screws are on the side of the outlet. The ground screw will be on one end of the outlet.
The white wire goes to the silver screw terminal (neutral), the black wire goes to the brass screw terminal (hot), and the green or bare wire goes to the green screw terminal or grounding clip (ground). Make sure to follow the manufacturer's instructions and adhere to electrical safety practices when installing the outlet.
The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.
In typical American wiring the black wire on an outlet goes to the gold (copper) screw and the white wire goes to the silver screw. The ground wire goes to the green screw.
To wire a 3-prong outlet with newer 4-wire cable, you will connect the black and red wires to the brass screws for the hot connections, the white wire to the silver screw for the neutral connection, and the green or bare wire to the green screw for the ground connection. Be sure to consult local electrical codes to ensure proper installation.
On a 110 volt circuit, Black is hot, White is neutral, Green or bare Copper is ground. . Connect Black to the gold screw, White to the silver screw, and bare copper ground to the Green ground screw on the receptacle. On a 220 Volt circuit Black & Red are both hot, each carrying 110 volts for a total of 220. White is Neutral and ground is Green or bare copper.
To wire a lamp socket correctly, first turn off the power. Then, connect the neutral wire to the silver screw and the hot wire to the gold screw on the socket. Make sure the wires are securely attached and the socket is properly grounded. Finally, test the lamp to ensure it is working safely.
Black wire to the gold screw, white wire to the silver screw, green wire to the round or U shaped prong screw.
do you mean points, or the wireless connection?
When wiring a three-wire U.S. single or duplex 15 or 20 amp receptacle: GROUNDING (green or bare) wire goes to the green screw. NEUTRAL (white) wire goes to the silver screw. HOT (could be any other color, often black) goes to the brass screw. For a better understanding, check out the Related link PDF shown below. : IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. : If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work ANDalways use an electrician's test meter having metal-tipped probes(not a simple proximity voltage indicator)to insure the circuit is, in fact, de-energized.