a good conducter of electricity needs what object to work
It means do you want a mansion a jacuzzi to watch your movie the goonie loonies then we start bubling then what you doing next week ohh ohhh im the olny one you need now oh now just a mofuking kids oghh
Water is a very poor conductor of electricity and even if it has enough solutes in it to conduct electricity then it will still have a high resistance.If rainwater were to conduct the electricity then that water would heat up and evaporate almost instantly.But you need to remember that it would need a continuous channel of water to conduct electricity and the surface tension of water makes this unlikely to happen.Additional AnswerOverhead conductors are supported using insulators, the shape of which is designed to (a) shed water, and (b) to provide a long conducting path for any moisture between the top of the insulator and the bottom. For high-voltage lines, several insulators may be used in the form of 'strings', providing a sufficiently-long conducting path for any moisture path to have a sufficiently high resistance to prevent conduction.
The voltage of 277 volts is the wye voltage of a three phase 480 volt distribution. In the 480 volt CDP (Central Distribution Panel), you will need a 600 volt rated single pole 15 amp breaker installed in the CDP. The load will be connected to the output terminal of the breaker and the other conductor will be connected to the neutral bus in the CDP. The minimum size conductor for the 15 amp circuit will be a #12 copper conductor.
Yes electricity needs a path to return to complete a circut
The definition of electricity is the flow of charge. Usually our charges will be carried by free-flowing electrons. Negatively-charged electrons are loosely held to atoms of conductive materials. With a little push we can free electrons from atoms and get them to flow in a generally uniform direction. A closed circuit of conductive material provides a path for electrons to continuously flow. The charges are propelled by an electric field. We need a source of electric potential (voltage), which pushes electrons from a point of low potential energy to higher potential energy.
A key is typically not a conductor of electricity on its own. However, if the key is made of a metal such as copper or aluminum, which are good conductors of electricity, then it can conduct electricity. The key would need to be part of a circuit for it to conduct electricity.
static electricity doesn't really need a conductor, a high enough voltage will cause electrons to jump a distance, without a conductor, as long as there is no insulator involved. All you need is a sufficient amount of free electrons on one side, say your finger tip, and a good ground on the other side, try a car door handle.
a conductor and a source of energy
Sulfur is not a good insulator of electricity. It is a poor conductor of electricity, like rubber or wood. If you need a material for insulating against electricity, consider using materials like plastic or glass instead.
Oh, dude, like, yeah, bronze is an okay conductor of electricity. It's not as great as copper or silver, but it can still get the job done if you're not too picky. So, if you're in a pinch and need some electricity flowing, bronze can help out... kinda.
Oh, dude, air conducting electricity? That's like asking if a goldfish can drive a car. Technically, air can conduct electricity, but it's not exactly winning any awards for being a top-notch conductor. So, yeah, it can happen, but it's not like air is out there conducting electricity like it's its full-time job.
A piece of string is a poor conductor of electricity due to its non-metallic composition. However, it is not a good insulator either, as it can still conduct static electricity and heat to some extent. If you need an insulator, it is better to use materials like rubber or plastic.
A substance that conducts electricity is a conductor. There is no special name for one that is solid; if you need to specify that it is solid, just call it a "solid conductor".
Objects that need electricity to work include lamps, televisions, computers, refrigerators, and smartphones. Generally, any device that has electronic components or requires power for operation would need electricity to function properly.
Yes, surgical steel is a good conductor of electricity due to its high iron content. This is why surgical steel is often used in medical instruments and implants that may need to conduct electricity in certain applications.
Yes all metals are good conductor. If you doing a precision circuit you should use copper or it if it is very very precise silver or gold. In most cases you can use steel or copper. You only need to use gold or silver if you are making a computer or IC
It is not a heat conductor.