answersLogoWhite

0

they are to convert power into jeremy osborne, which in turn creates an aneesh karan

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Electrical Engineering

What are the advantages of double wound transformer over a auto transformer?

The difference between a double wound step up transformer and an auto transformer is the double wound on the step up transformer and the single wound on the auto transformer.


Diagram of a double wound transformer?

do exist! Is there a real question about d.w.t's? On a double wound transformer, the primary winding is isolated from and secondary winding, but still use the same common core.


What are two types of EMF induced in a double wound transformer?

1. self- induction2. mutual- induction


How do you design the transformer?

You can construct a transformer, and it's not particularly difficult if you know what you are doing. It's not possible to give you detailed instructions without knowing what type of transformer you need, and the answer to that depends on what it's for. A transformer consists of two coils of wire, electrically insulated from each other but magnetically coupled. How the coupling is done depends mostly on the frequency of operation. For electric power ( 50 or 60 Hz ) the coupling must be very tight, so the coils are wound onto an iron core. For audio frequencies you would generally do the same, although a ferrite core is a possibility. For radio frequencies, the transformer would be wound on a ferrite core if you need tight coupling for power transfer. Otherwise it might be wound without a core (usually referred to as an air-cored transformer). Please repost the question, saying what the transformer is intended to do.


Why is it necessary to use two channels on a oscilloscope to view the entire secondary voltage?

to maintain the same secondary voltage output from the transformer the primary transformer is wound for operation but it is split exactly in the centre.when used as an ac the two half of the primary are connected in series producing the designed output from the secondary.example if used on a 120v line the 2 halves of primary are connected in parallel producing 25v from the secondary and paver(vA) at of the transformer is the same

Related Questions

What are the advantages of double wound transformer over a auto transformer?

The difference between a double wound step up transformer and an auto transformer is the double wound on the step up transformer and the single wound on the auto transformer.


In a double wound transformer the secondary winding is always connected to?

To the load !


Three main parts of a double wound transformer?

Core Primary Winding Secondary Winding


Diagram of a double wound transformer?

do exist! Is there a real question about d.w.t's? On a double wound transformer, the primary winding is isolated from and secondary winding, but still use the same common core.


What are two types of EMF induced in a double wound transformer?

1. self- induction2. mutual- induction


How do you convert a 110volt turbo oven to 220volt purchased in America you live in UK?

Buy a double wound step-down transformer (230/115 volts) of he appropriate capacity (kva) . You may have to replace the plug on your oven to match the output socket of the transformer if you buy this in England. Do not buy a single wound (auto transformer) as it can be extremely dangerous if it is wrongly connected.Alwyn.


What is the difference between double wound transformer and an auto transformer?

A double wound transformer has two separate windings (primary and secondary) that are magnetically coupled, allowing for electrical isolation between the input and output circuits. In contrast, an auto transformer has a single winding that acts as both the primary and secondary, with part of the winding shared between them, which means it provides no electrical isolation. This design makes auto transformers more compact and efficient for certain applications, but they are less versatile in terms of voltage transformation and safety.


Why use a step down trans former when the lower voltage is available?

The secondary winding of a double wound transformer is 'floating' in that it is not referenced to any other part of the circuit. You choose how to reference it. You cannot accomplish this without a transformer.


How much fluid leaks out of a wound after an operation?

It depends on how bad the operation is and how big the wound is and how good /great of a job did the Dr.`s do on repairing the wound.


What are the disadvantages of a double wound transformer?

There is no disadvantage with a current transformer -it does exactly what it's supposed to do, that is:reduce the current flowing in the primary circuit to a value that can be handled by its burden (ammeter or protective relay).electrically-isolate its secondary circuit from the primary circuit.


What is The operation of Current Transformer?

CT together with a ammeter is used to measure the current in high current or high voltage circuit, where a normal ammeter can not be connected in series in such high voltage or high current circuits. It is a secondary winding (like in transformer) wound on a single core primary wire and relative secondary current reperesnets the primary current. CT are also used protection purposes. Basic principle of CT i same either for metring or protection.


How do you design the transformer?

You can construct a transformer, and it's not particularly difficult if you know what you are doing. It's not possible to give you detailed instructions without knowing what type of transformer you need, and the answer to that depends on what it's for. A transformer consists of two coils of wire, electrically insulated from each other but magnetically coupled. How the coupling is done depends mostly on the frequency of operation. For electric power ( 50 or 60 Hz ) the coupling must be very tight, so the coils are wound onto an iron core. For audio frequencies you would generally do the same, although a ferrite core is a possibility. For radio frequencies, the transformer would be wound on a ferrite core if you need tight coupling for power transfer. Otherwise it might be wound without a core (usually referred to as an air-cored transformer). Please repost the question, saying what the transformer is intended to do.