Pure water, by itself, is not capable of conducting electricity. However, when other substances are added and ions make their way into water, those free ions can cause water to conduct electricity.
Most metals conduct electricity, as does carpet and most liquids - Pure water doesn't.
When molten or dissolved in water it can but in its standard, solid state it cannot.
Water is a very poor conductor of electricity and even if it has enough solutes in it to conduct electricity then it will still have a high resistance.If rainwater were to conduct the electricity then that water would heat up and evaporate almost instantly.But you need to remember that it would need a continuous channel of water to conduct electricity and the surface tension of water makes this unlikely to happen.Additional AnswerOverhead conductors are supported using insulators, the shape of which is designed to (a) shed water, and (b) to provide a long conducting path for any moisture between the top of the insulator and the bottom. For high-voltage lines, several insulators may be used in the form of 'strings', providing a sufficiently-long conducting path for any moisture path to have a sufficiently high resistance to prevent conduction.
Stone is a bad conductor of heat and electricity so very very less or no electricity will flow Most stones does not conduct electricity since they are non-metallic and non-conductive especially when dry. However, when wet there is a bigger possibility to conduct electricity, but it is due to water not of the stone. On the other hand, some stones which are called gemstones or crystallized stones conduct electricity, it is called piezoelectric crystals. To give you an example of crystals, quartz, topaz,and tourmaline are known for their piezoelectric effect.
Water conducts electricity and is therefore contraindicated for use on energized electrical equipment, however it is much cheaper than the chemicals that can be used on energized equipment making it more economical when water is able to be used. Similarly water should not be used on grease fires as it will spread out the grease and the fire rather than smothering it. Water if pure without contaminants does not conduct . Having stated that electrical fire can hardly be contained by water since the air itself will conduct electrons by ionization. So to contain an electrical fire a the oxygen must be removed and water will not do that.
Protons (acid), ions (salt), charged particles.
Not in their standard solid states, but they can if molten or dissolved in water.
The presence of ions in water causes water to conduct electricity. Ions are charged particles that are formed when atoms gain or lose electrons in a solution. These charged particles allow for the flow of electrical current through the water.
Yes, a test can be conducted on the water to check for the presence of chlorine.
water
Yes, sodium hydroxide (NaOH) can conduct electricity when dissolved in water or in molten form. This is because sodium hydroxide dissociates into sodium (Na+) and hydroxide (OH-) ions, which are free to move and carry an electric current.
ions? disassociated ions?
pure water does not conduct electricity. the presence of electrolytes in the water is what conducts electricity. the equation for the conductivity (ability to conduct electricity) Conductance = 1/ resistance
yes it does, due to the presence of ions.
the presence of minerals such as sodium cholride,magnesium etc causes the difference in ocean water ....
the liquid could be a metal such as mercury or gallium.the liquid could be a polar solvent such as water and contain ionsany surface whether it be a solid or a liquid will conduct an AC current.
Tap water is a conductor of electricity due to the presence of dissolved minerals and ions in the water that allow it to conduct electricity.