0
The first paragraph below illustrates why you should hire a qualified electrician to do your electrical work and not take advice from just anyone.
"well i just the same install and it was recommended i go with a 3 conductor 2/0 aluminum AWG but to be safe with a voltage drop over that distance and a possible large draw for my equitment that i plan on getting in the future plus a rotary 3 phase 20 hp converter i upsized it to 3 conductor 1/0aluminum AWG"
(The next larger size wire would be a 3/0 not a 1/0! This is a good example of why unqualified people should not do electrical work, the answer below is correct).
To answer this question, the amperage of the load at the end of 200 feet has to be supplied.
What else can I help you with?
What is the wire size for 208 volt?
As with any electrical installation, the wire size used depends on the expected maximum current the wire will carry. That cannot be determined by voltage alone.
What size conductor is needed to carry 25 amps 120 volt AC over 400 feet?
A #4 copper conductor will limit the voltage drop to 3% or less when supplying 25 amps for 400 feet on a 120 volt system.
What size aluminum wire needed for 30 amp at 240 volt for 500 feet underground?
A 1/0 aluminum conductor will limit the voltage drop to 3% or less when supplying 30 amps for 500 feet on a 240 volt system.
Which is the unit of measure they describes electrical pressure is?
Volt is a measure of electrical pressure.
Can you convert an old 15 amp 125 volt electrical outlet to a household electrical outlet?
A 15 amp 125 volt outlet is a household outlet.
What is the recommended wire size for a 220-volt electrical circuit?
The recommended wire size for a 220-volt electrical circuit is typically 10-gauge wire.
What are the size and door requirements for a 600 amp 240 volt single phase commercial electrical room?
The only requirement would be the distances in front and on the sides of the service boxes for access. 3 feet.
What wire should be used for a 220-volt electrical connection?
For a 220-volt electrical connection, a wire with a gauge of at least 10 AWG (American Wire Gauge) should be used to ensure proper safety and functionality.
What wire size should be used for a 30 amp 240 volt circuit?
For a 30 amp 240 volt circuit, a wire size of 10 AWG should be used.
What is the unit of electrical voltage?
The Volt
What Volt size is used for a EX Special Edition 4-door civic sedan 2005 automatic?
That car, like all, uses as 12-volt electrical system.
What size of battery is on a 1976 VW beetle?
Should be a 12 volt battery.
Is a grove rt 58c crane 12 volt or 24 volt electrical system?
The Grove RT58C crane typically comes equipped with a 12-volt electrical system.
Is a Packard 400 a 8 volt electrical system?
No. Is a 6 volt system.
What is the wire size for 208 volt?
As with any electrical installation, the wire size used depends on the expected maximum current the wire will carry. That cannot be determined by voltage alone.
What do I do to protect the video signal when I have to run a coax cable at a right angle over or near an 110 volt electrical wire?
If it isn't going parallel to the electrical wire, coax should be able to shield against simply crossing over the wire. Just don't follow the electrical wire for more than a couple feet.
What size conductor is needed to carry 25 amps 120 volt AC over 400 feet?
A #4 copper conductor will limit the voltage drop to 3% or less when supplying 25 amps for 400 feet on a 120 volt system.
