answersLogoWhite

0

magnetising current test,

magnetising balance test,

s.c test,

vector group test,

winding resistance test,

ratio test

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Why sumpners test is called heatrun test?

The temperature rise is not considered in OC & SC tests of transformers.. But in Sumpner's test, temp. rise is considered.. Hence is called "Heat-run test".. Also, the transformers draw only the power req. to supply core & Cu. losses of transformer..


What are the advantages of power transformers over voltage transformers?

Power transformers can be used for power transformation. Voltage transformers are not suitable for high power applications.


What are the functions of current transformers and the difference between current transformers and voltage transformers?

To sense the current flow across the current transformers and to monitor the current ratings. In current transformers no voltage variations occurs. but in voltage transformers it is mainly used to increase or decrease the voltage value.


Who invented transformers?

Henry Orenstein invented transformers.


What are the two types of transformers?

The two general categories of transformer, based on their construction, are (a) mutual transformers and (b) autotransformers.Mutual transformers have two coils, or 'windings', termed the primary (input side) and the secondary (output side), which are electrically isolated from each other, being linked with a magnetic field.Autotransformers have a single, shared, winding and so, do not provide isolation between the primary and secondary sides.Mutual transformers can be further classified, according to their function: e.g. power transformers, distribution transformers, isolation transformers, instrument transformers, matching transformers, etc.

Related Questions

Different tests performed on transformers?

There's not a lot to go wrong in a transformer. You can test with an ohm meter (resistance meter) to check that the wires aren't broken if you know what the connections are. It will read low around 10 ohms if the wires are OK and will read very high if they aren't. However there is a slight possibility that if it is damaged some of the wires may have shorted out so it will still read OK but will overheat when you put full power on it. So you need to power it up and check the output is what it should be with a voltmeter set on AC for a suitable scale. Be careful not to electrocute yourself.


Are high voltage tests on current power transformers recommended and if not why?

Hi-pot and megger tests are common to check the insulation on transformers, motors, refrigeration compressors, etc. They help check the condition of equipment to avoid a future falure. High votage test are conducted in current transformers by shorting the seconday and earth,can apply 3 times the rated voltage


What are the name of the fourth transformers movies?

Transformers (2007)Transformers: Revenge of the Fallen (2009)Transformers: Dark of the Moon (2011)Transformers: Age of Extinction (2014)Transformers 5 (2017)


Why sumpners test is called heatrun test?

The temperature rise is not considered in OC & SC tests of transformers.. But in Sumpner's test, temp. rise is considered.. Hence is called "Heat-run test".. Also, the transformers draw only the power req. to supply core & Cu. losses of transformer..


What is transformers three about?

transformers!


What Transformers are going to be in Transformers 4?

They have not released a list of the Transformers yet.


What are the names of the transformers movies?

Transformers (2007) , Transformers: Revenge of the Fallen (2009) and Transformers: Dark of the Moon (2011) .


Need the names of all transformers movies?

There's Transformers, Transformers: Revenge of The Fallen, and Transformers: Dark of The moon.


What Is the title of transformers 1?

the first Transformers movie is simply called Transformers


What has the author Bob Budiansky written?

Bob Budiansky has written: 'Transformers, Vol. 9' 'Transformers, Vol. 7' 'Transformers, Book 6' 'Transformers, Vol. 2' 'Transformers, Vol. 10' 'Transformers, Vol. 3'


What are the names of all three transformer movies?

The first Transformers movie is called 'Transformers'. The second Transformers movie is called 'Transformers: Revenge of the Fallen'. The final Transformers movie is called 'Transformers: Dark of the Moon'. Your Welcome :) ...


Difference between precommissioning and commissioning?

Pre-commissioning and commissioning are words used in the engineering field. Pre-commissioning begins many months before the start of the project. During this phase duties are assigned.