The power lost in a resistor is
(the current through the resistor) times (the resistance) watts. That's the same thing as
(the voltage across the resistor)/(the resistance)watts.
The total resistance of resistors in series is simply the sum of the resistance values of those resistors. If the resistors are identical, then you can multiply the resistance of one of them by the number of resistors in the circuit.
Resistors are wired in series when they are connected in a line. The current flows through the resistors one after the other.
A logic gate composed only of diodes and resistors. The only types are AND gates and OR gates. However the number of layers of logic that can be implemented are severely limited due to losses in these gates.
Resistors have resisting power(resists the electric power).Due to having the resistive property, the name resistor is given to such electrical device.
parallel combination of resistors are used in house circuits
To determine how many resistors need to be made to deliver 5,000 resistors, we must consider production losses, defects, or any other factors that affect the final count. For example, if they expect a 10% defect rate, they would need to produce 5,556 resistors (5,000 divided by 0.9). Therefore, the exact number of resistors to be made depends on the anticipated yield or defect rate in the production process.
most of the resistors commonly used are carbon resistors
The total resistance of resistors in series is simply the sum of the resistance values of those resistors. If the resistors are identical, then you can multiply the resistance of one of them by the number of resistors in the circuit.
Film resistors have lower noise than carbon resistors.
Resistors are wired in series when they are connected in a line. The current flows through the resistors one after the other.
Both resistors will have the voltage of the battery.
Carbon composition resistors are resistors that are made with carbon or graphite mixed with a binding material. It's one type of resistors among several. There are also carbon-film resistors and metal-film resistors. Out of all the resistors, carbon-film resistors have the greatest tolerances and changes to temperature fluctations. Thus, they are used in applications where precision isn't critical and where temperature will not change drastically.
resistors are used to resist the flow of current in a circuit.......
Resistors are like funnels, they restrict the flow of current.
Linear resistors
Resistors are a material that resists the flow of electrons. The resistors are materials that resist electric current energy to be changed into other forms.
I observe that the total effective resistance of several resistors in series is the sum of the individual resistance values of the individual resistors.