answersLogoWhite

0

Kilo Volts K = 1000 so 5KV = 5000 volts

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Minimum ground clearance for 765 kv Transmission Line?

Ground clearance132 kv - 6100 mm220 kv - 7015mm400 kv - 8840mm765 kv - 15000mm


What voltage does the hydro dam produce electricity yet?

Hydro dams typically generate electricity at a voltage ranging from 4 kV to 25 kV for initial transmission. However, this voltage is usually stepped up to higher levels, often between 115 kV and 765 kV, for long-distance transmission through power lines. The specific voltage depends on the design of the dam and the requirements of the electrical grid it feeds into.


What is the line voltage of a 230000 kv transmission line?

Transmission and distribution voltages are normally expressed in terms of line voltages, so the answer is that the figure you quote is a line voltage. Incidentally, do you really mean 230 megavolts for a transmission voltage?? And the symbol of kilovolt is 'kV', not 'kv'.


What is mean of EHV substation?

Extra High Voltage substation. It generally 132 kv or higher


How much MW power can be evacuated through 33 kv electrical lines?

The power that can be evacuated through 33 kV electrical lines depends on the current-carrying capacity of the conductors used and the overall system design. Typically, a 33 kV line can handle power levels ranging from 5 MW to 20 MW, depending on factors such as line length, conductor type, and ambient conditions. For precise calculations, the specific parameters of the installation must be considered, including the thermal limits of the conductors and any regulatory constraints.

Related Questions

What does KV mean when refer to energy?

A kV is a kilovolt or 1000 volts.some one who is a migit and annoying and loves chikin


Has Honduras three phase current?

Yes of course. The electrical grid in Honduras has 1,133 km of lines of 230 kV, 919 km of 138 kV, with distribution at 13.8 kV and 35.5 kV.


What does MFS mean in electrical terms?

In electrical terms, MFS stands for "Medium Voltage Switchgear." It refers to equipment designed to control, protect, and isolate electrical equipment in medium voltage (typically between 1 kV and 36 kV) power systems. MFS is essential for safe and reliable operation in industrial, commercial, and utility applications, enabling efficient management of electrical distribution.


What does TA in electrical language mean?

Turbo-Alternator


Voltage of a cable is 220 kv what does this mean?

The lower-case 'k' in 'kV' (not 'kv') is a multiplier, representing 'kilo', meaning 'a thousand times', and the upper-case 'V' represents 'volts', the SI unit for potential difference. So a '220-kV' cable has a line voltage (voltage between conductors) of 220 kV.


Why differential relay is not used for 11kv transformers?

It depends what you mean by an '11-kV transformer'; do you mean a primary transformer (33/11-kV transformer) or a distribution transformer (11-kV/400-230-V transformer). Differential protection IS offered on primary transformers.


What do you mean by the Kv or Mv rating of an insulator?

The Kv marking is how many Kilavolts of electricity the insulator will take. Likewise the Mv is megavolts the rating


What does the voltage rating on a battery mean?

Voltage rating usually refers to the insulation of the wire but could be terminology for electrical equipment also. In North America standard voltage ratings of wire are 300, 600, 1000, 5Kv, 15 Kv and 25 Kv.


What city is KV?

There is no city KV. KV stands for Kilo Volts


Minimum ground clearance for 765 kv Transmission Line?

Ground clearance132 kv - 6100 mm220 kv - 7015mm400 kv - 8840mm765 kv - 15000mm


What voltage does the hydro dam produce electricity yet?

Hydro dams typically generate electricity at a voltage ranging from 4 kV to 25 kV for initial transmission. However, this voltage is usually stepped up to higher levels, often between 115 kV and 765 kV, for long-distance transmission through power lines. The specific voltage depends on the design of the dam and the requirements of the electrical grid it feeds into.


What is voltage in rotor of 11 KV AC generator?

Star (or 'wye') connected alternators have a phase voltage of 6.35 kV, and a line voltage of 11 kV. Incidentally, it's 'kV', not 'KV'.