"com" means common, very often the white or neutral conductor. On devices that have multiple wiring configurations it is the terminal used in all configurations.
switch socket outlet
Sa isang electrical wiring diagram, ang "COM" ay nangangahulugang "Common." Ito ay karaniwang ginagamit upang ipakita ang isang karaniwang koneksyon o terminal na maaaring magbigay ng kuryente sa iba’t ibang bahagi ng circuit. Ang COM ay kadalasang makikita sa mga switch, relay, at iba pang electrical devices upang ipakita ang sentro ng koneksyon.
LOAD
Double pole and single pole.
The red color on British wall socket switches typically indicates a switched live connection. This means that the switch controls the power supply to the socket, allowing users to turn it on or off. In older wiring systems, red was commonly used for live wires, but modern standards have shifted to using brown for live wires.
To disconnect the wiring connector from the headlight bulb socket on a 2000 Chrysler Voyage, remove the wiring that goes into headlight plastic lock ring. Snap it loose and pull out the bulb socket.
Surface wiring is wiring that is enclosed in some kind of containment and surface fixed. For example if you installed a conduit containment system to supply a socket this is screwed to the walls with "saddles" and a mounting block is used to protrude the socket off the wall to take the conduit. This is surface wiring as opposed to concealed wiring which is encased in the fabric of the wall and all you see is the socket.
switch socket outlet
Cut the wires then splice on new socket
Try autozone . com
go to document buzz . com or L-wiring diagrams.pdf
To replace the cigarette lighter socket in a Ford E150, start by disconnecting the vehicle's battery for safety. Remove the trim panel surrounding the socket using a trim removal tool, then unscrew the socket from its mounting. Disconnect the wiring harness from the back of the socket and install the new socket by reversing the steps—connecting the wiring, securing it in place, and reattaching the trim panel. Finally, reconnect the battery and test the new socket for functionality.
http://www.wiringdiagrams21.com/1997-honda-xr400r-electrical-wiring-diagram/
To replace the bulb socket on the running boards of a 2000 Ford Expedition, first, remove the old socket by twisting it counterclockwise to release it from the housing. Disconnect the wiring harness by pulling it away from the socket. Insert the new bulb socket into the housing and twist it clockwise to secure it. Finally, reconnect the wiring harness to the new socket, ensuring a snug fit before testing the lights.
what does the word com mean as like a website and at the end it says .com
Short in the wiring, short in a socket, or overloaded circuit.
Short in the wiring or light bulb socket.