It generates a alternating current to keep the motor rotating in the same direction.
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
U sohuld replace the slip-ring which it is in the AC generator to a commutator. It is a split-ring. Then u can produce DC generator.
slip ring is connect on shaft of motor to collect current from commutator without any complicate connection and with use of it resistors can be insert in circuit and therefore speed control of motor can easily achive
A commutator is an electrical switch that periodically reverses the current direction in an electric motor or electrical generator. A commutator is a common feature of direct current rotating machines.
to a brush
commutator
Commutator is a split ring which reverses the current .when the commutator turns around due to magnetic force and because of it even the current gets reversed
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
The point is that, with a d.c. motor, we don't want the torque to reverse every half-revolution, if the motor is to continue running in the same direction. To achieve this, we use a split-ring commutator/brushes, which rotates with the armature coil. Essentially, a split-ring commutator has twofunctions: (1) to enable us to connect the rotating coil to an external supply circuit and (b) to act as a rotating switch, ensuring that the armature current always flows in the same direction relative to the motor's magnetic field. Thanks to (b), the machine will continue to rotate in the same direction.Without a split-ring commutator, after half a revolution, the armature current will reverse direction relative to the magnetic field, the torque will reverse, and the motor will reverse direction.
A switch that reverses the direction of the current in a motor is called a forward reverse drum switch. It is a single phase motor that turns from clockwise to counter clockwise.
It's called a 'split-ring commutator'. It changes the naturally-produced a.c. into d.c.
U sohuld replace the slip-ring which it is in the AC generator to a commutator. It is a split-ring. Then u can produce DC generator.
The split rings cause the direction of the magnetic field in the armature to change direction as the motor rotates. If this didn't happen the motor would not rotate. Slip rings can be used for an AC motor which causes the direction of the magnetic field to change with the AC waveform.
The only difference between slip rings and commutator is that commutator can change the frequency where as the slip rings can not do it.
The commutator is part of the armature on a DC motor and this assembly is the rotating element of a motor.
slip ring is connect on shaft of motor to collect current from commutator without any complicate connection and with use of it resistors can be insert in circuit and therefore speed control of motor can easily achive
no they do notAnswerYes, a split-ring commutator does convert a.c. to d.c. It is a rotary switch fitted to the shaft of the generator, which reverses the polarity of its output every half-cycle, so that the generator's output is a pulsating d.c. instead of a.c.