0
What else can I help you with?
How much Electricity is used by geyser?
It depends on the wattage of the unit. When that is found use the formula; Amps = Watts/Volts to find your answer.
How much power is consumed by a 6 ohm load with 12 volts applied?
Volts = Amps x Resistance Therefore Amps = Volts / Resistance
How many amps are in a 32 KWH?
There are zero amps in 32 kWh. Watts are the product of amps times volts. Without stating what the voltage is, this calculation can not be made. I = W/E is the formula to find amperage but there has to be a time constant if kWh is used. Usually the question is asked as to how many amps are in 32 kW.
How many amps does one kilowatt make 240 volts single phase?
There is one part of the question missing. To find an answer the kW of the heater must be stated. Then the equations used are, to change kW to watts, Kw/1000 = watts. Once that is found then use, I = W/E, Amps = Watts/Volts. This will give you the value in amperage of the heater.
How many amps does 6000 watts pull?
There are zero amps in 6600 watts. Watts are the product of amps times volts. W = A x V. To find amperage use the following equation, A = W/V, so as you can see a voltage value is needed in the equation to result in an amperage.
Find amp's when watts and voltage is known?
The formula you are looking for is I = W/E.
5000 watts at 240 volt will draw how many amps?
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
How many amps equal 1800 watts at 110 volts?
To find the amperage, you can use the formula: Amps = Watts/Volts. Plugging in the values, you get Amps = 1800 Watts / 110 Volts ≈ 16.36 Amps.
What formula can be used to find wattage?
Watts= Volts x Amps
What is the formula to find watts?
There are several ways to find watts; volts x amps = watts or resistance (ohms) divided by amps squared or volts squared divided by amps. You can search for Ohm's Law to find examples of these different methods and sample calculations.
If you have 72 watts and 12 volts dc how many amps am i producing?
To find the amperage, you can use the formula: Amps = Watts / Volts. In this case, with 72 Watts and 12 Volts, you would have 6 amps of current.
How many watts are in 60 amps at 115 volts?
The formula you are looking for is W = Amps x Volts.
How to find watts in physics and what is the formula for calculating it?
To find watts in physics, you can use the formula: Watts Volts x Amps. This formula calculates power, which is measured in watts, by multiplying the voltage (in volts) by the current (in amps) flowing through a circuit.
How many amps equal 3000 watts at 460 voltage?
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
In a 12 volt solar panel which produces 170 watts equals how many amps?
Watts = Volts x Amps, if you use your algebra you will find that it's approx 14 Amps.
How many amps would 2600watts use 240v 50hertz?
To find the amperage, use the formula: Watts = Volts x Amps. Given 2600 watts and 240 volts, the amperage would be calculated as 2600 watts / 240 volts = 10.83 amps.
How many watts does 100 amps at 120 v?
The formula you are looking for is I = W/E. Amps = Watts/Volts.
