you will get the opposite polarity DC as before
Where a single diode is used as a rectifier you get halfwave rectification when the sinus wave is going positive the diode will conduct but in the negative half of the cycle it will block the current flow so the result wave form will be only the positive half that will be available for half the period of the cycle the other half will be 0 Volt
if you reverse the diode in a half wave rectifier, you would expect the A- Ripple to increase B- output to be less filtered C- out put polarity to be reversed D- output voltage to decrease
yes, diode can be used as rectifier diode to convert ac to dc
A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.
Nothing will happen to the diode but that rectifier effectively becomes a half-wave rectifier.
Where a single diode is used as a rectifier you get halfwave rectification when the sinus wave is going positive the diode will conduct but in the negative half of the cycle it will block the current flow so the result wave form will be only the positive half that will be available for half the period of the cycle the other half will be 0 Volt
Because when reverse biased it behaves like any other rectifier/diode.
if you reverse the diode in a half wave rectifier, you would expect the A- Ripple to increase B- output to be less filtered C- out put polarity to be reversed D- output voltage to decrease
yes, diode can be used as rectifier diode to convert ac to dc
A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.
Nothing will happen to the diode but that rectifier effectively becomes a half-wave rectifier.
how can u tell if the rectifier is bad on a 2001 suzuki intruder 1500lc
The output degrades to a half-wave rectifier.
yes ofcourse diode can be used as rectifier but it's an uncontrolled rectification.
Yes **************************************** Yes they can but there are pitfalls. A normal diode will have a high reverse breakdown voltage. A zener has a relatively low breakdown voltage (its "zener"voltage). If a zener diode is used as a rectifier it must have a zener voltage at least twice the peak of the applied a.c.
tunnel diodethe doping level of the tunnel diode is high when compared with the rectifier diodeit exhibits negative resistancerectifier diodethe doping level of rectifier diode is low when compared with the tunnel diode
piv:the maximum value of reverse voltage across a diode that occurs at the peak of the input cycle when the diode is reversed-biased.