when the frequency is increased the total impedance of a series RC circuit is decrease.
what is resonant frequency
Maximum power transfer happens in a circuit when the resistance of the circuit equals the reactance. Impedance Z = R + jX. At R=X, maximum power transfer happens.
If the circuit is undriven, there is no power, so inserting a core does nothing. In general, however, inserting a core into an inductor increases its inductance. Depending on the circuit, that lowers the resonant frequency.
when lagging Power Factor changes to leading PF, then the voltage across the circuit in which capacitor bank is connected, is increased.
The supply frequency determines the synchronous speed of the machine -i.e. the speed of the naturally-rotating field within the airgap. As motors typically run around 5% below this speed, the rotor's speed would increase.
The flow of electrons meets an increased impedance to it's flow.
The flow of electrons meets an increased impedance to it's flow.
When the frequency is doubled, the resistance of a circuit remains unchanged. Resistance in a circuit is independent of frequency and is determined by the material and physical dimensions of the resistor.
When the frequency of a transformer is increased, the core losses of the transformer increase due to increased eddy current losses and hysteresis losses. This results in a rise in temperature of the transformer. Additionally, higher frequency can affect the impedance of the transformer and alter the voltage regulation and efficiency.
In both cases, the time constant of the RC circuit is increased. If the application is a high- or low-pass circuit, then the filter cutoff frequency is decreased in both cases. If the application is a phase-shift network, then the frequency for a given phase- shift is reduced.
what is resonant frequency
If the frequency of a sound is increased, the pitch goes higher.
Maximum power transfer happens in a circuit when the resistance of the circuit equals the reactance. Impedance Z = R + jX. At R=X, maximum power transfer happens.
When the energy of a wave is increased, the frequency remains the same. Frequency is determined by the source of the wave and does not change with energy.
If the time period is increased, the frequency decreases inversely proportionally. This is because frequency is the reciprocal of the time period. So, as the time period increases, the frequency decreases.
depends on the simple circuit. please describe it.
Don't cheat on your homework...