A '13-A socket outlet' is the popular name for the standard electrical socket used in the UK and other various other countries under the British sphere of influence such as the Arab Gulf countries.
The term derives from the fact that the socket is designed to take fused plugs which are rated at 13-A which, with a nominal voltage of 230 V, supply loads up to 3 kW. In the UK, these sockets are connected using a ring main system, rather than a radial system used in most other countries.
You probably mean to change it to a 240 V outlet... either case, you'll need to run a new wire and install a new breaker.
switch socket outlet
square
It enables you to switch off the load from the socket, rather than have to pull the plug out of the socket.
To connect a one-way switch and a switch socket outlet, first ensure the power is off at the circuit breaker. Connect the live wire from the power source to one terminal of the switch, and then connect the other terminal of the switch to the live terminal of the socket outlet. The neutral wire should be connected directly from the power source to the neutral terminal of the socket outlet. Finally, ensure all connections are secure and properly insulated before restoring power.
"S.S.O." likely stands for "Single Socket Outlet." "13A" indicates that the outlet is rated for a maximum current of 13 amps.
A '13-A socket outlet' is the popular name for the standard electrical socket used in the UK and other various other countries under the British sphere of influence such as the Arab Gulf countries.The term derives from the fact that the socket is designed to take fused plugs which are rated at 13-A which, with a nominal voltage of 230 V, supply loads up to 3 kW. In the UK, these sockets are connected using a ring main system, rather than a radial system used in most other countries.
The 2 amp (about two hundred watts at household voltage) difference isn't that significant so the construction of the sockets should not differ greatly unless they are made of different conducting materials (aluminum/copper). The 15A socket should have thicker contacts or wiring to support the extra amperage or better construction to conduct away the extra heat that might be generated.
2 Amp
To convert a light socket to an outlet, you will need to install a socket adapter that has an outlet built into it. This adapter can be screwed into the existing light socket, allowing you to plug in devices and use the outlet. It is important to ensure that the adapter is installed correctly and safely to avoid any electrical hazards.
Yes it can be plugged in with a 13A plug.
To convert a light bulb socket to an outlet, you can use a socket adapter that has an outlet built into it. This adapter can be screwed into the existing light bulb socket, allowing you to plug in and use electrical devices. Make sure to follow safety guidelines and consult a professional if needed.
Watts from a socket is dependant upon what the load connected draws. The maximum capacity from a socket is calculated by the following equation, W = A x V. So the maximum wattage you are able to draw from the socket before the fuse blows is W = 13 x 220 = 2860.
You probably mean to change it to a 240 V outlet... either case, you'll need to run a new wire and install a new breaker.
switch socket outlet
square
Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]