0
Total path length in a wire process refers to the cumulative distance that the wire travels during its manufacturing or processing stages. Job thickness, in this context, likely pertains to the thickness of the wire being processed. When you multiply the total path length by the job thickness (1500), you essentially get a measure that could indicate the volume of material processed or the overall workload associated with that specific wire manufacturing process. This calculation can help in assessing efficiency and operational metrics.
What else can I help you with?
What is the cable size for a 1500 kVA generator with cable length of 50 meters?
35 KVA generator using for load 100 meter length which cable need to used
What size of wire is needed for 1500 amps?
There is no single conductor that will handle 1500 amps. For ease of handling, the conductors should be installed in parallel, triple or quad runs. For a parallel run, 2 - 2000 MCM with an insulation factor of 90 degrees C will give you a total ampacity of 1550 amps. For a triple run, 3 - 750 MCM with an insulation factor of 90 degrees C will give you a total ampacity of 1500 amps. For a quad run, 4 - 500 with an insulation factor of 90 degrees C will give you a total ampacity of 1580 amps.
How do you calculate cable size from the 1500 mm length?
To calculate the cable size for a 1500 mm length, you need to consider factors such as the load current, voltage drop, and the type of insulation material. First, determine the current carrying capacity required based on the load. Then, use a voltage drop formula to ensure the drop is within acceptable limits, typically around 3-5% of the supply voltage. Consult cable sizing charts or standards that provide guidance based on these parameters to select the appropriate cable size.
1500 ma is a amp and a half?
Yes. 1500 mA = 1.5 A
What is the potential difference across a 1500 ohm resistor carrying a current of 0.075 A?
Potential Difference across a resistor is given by, Potential Difference = Resistance * Current = 1500 * 0.075 = 112.5 Volts
Calculate rate per hour on wire cut work?
Job workers using this formula as given :- total hrs. in Single pass (Single cut)=Total Path length x job thickness / 1500 total hrs. in Double pass (Double cut)=Total Path length x job thickness / 1200 total hrs. in Triple pass (Triple cut)=Total Path length x job thickness / 900 total hrs. in Four pass (Four cut)=Total Path length x job thickness / 600 and the Rates are Rs.200.00/hr to Rs.250.00/hr.
What is the total length of the train?
They range from 50 metres to over 1500 metres.
What is the overall height width and length of a 1991 Chevy 1500?
What is the overall height, width and length of a 1991 Chevy 1500?
In computers What is the length of the average frame?
1500
What is the length of the Atlas Mountains?
The length of the Atlas Mountain is 1500 kilometres (930miles).
Do all words count in an essay?
If you are referring to a required length of an essay (1500 words, etc.), quotes generally do not count towards your total number of words.
What is the size of the Florida manatee?
Size9-13 ft (3-4 m) total length; 1,100-3,300 lb (500-1500 kg) body mass
What is the length of a 1500 watt baseboard heater?
The length of a 1500 watt baseboard heater can vary depending on the model and manufacturer. Typically, a 1500 watt baseboard heater can range from around 48 to 72 inches in length. It's best to check the specifications provided by the manufacturer for the specific heater you are interested in.
How long will be the side of a rectangular table whose area is 1500 cm and width of 30cm?
1500/30 = 50 cm in length
What is the length of a nv3500 transmission from the front of bellhousing to the rear seal in a 1991 Chevy 1500 2wd?
The length of the 1991 Chevy 1500 transmission is 37 inches. The bell housing will account for approximately 5.5 inches.
Will a topper off a 1998 Chevy 1500 fit a 2003 Chevy 1500 both are long beds?
Measure the length and width of the beds.
How many 25m length in 1.5k?
There are 1500/25 = 60 lengths of 25cm
