Two receptacles on a branch circuit, each in parallel, both in series with the circuit breaker.
The blower motor, ignition transformer, and oil solenoid on an oil burner, each in parallel, all in series with the acquastat (water temperature control switch).
In a modern home you use parallel circuit's. The reason why they are parallel circuit and not series is For example: say your kitchen light goes off, if that light goes off the others in your house won't. They also use parallel circuit in schools. However, when there is a switch in the circuit, that switch is in series with the load, so you could say that electrical wiring is arranged in series-parallel.
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)
A parallel circuit is used in household wiring. It allows a current to split in half and gives devices just the amount of power they need. This method of wiring is useful for fixing a circuit because the power can flow around the problem and you can fix it.
Because the supply voltage is common to each branch of a parallel circuit, each appliance receives its rated voltage which is necessary for the appliance to operate at its rated power. This is the main reason. Another reason is, should one appliance fail, then -unlike a series circuit- the other appliances will keep working.
Always parallel. Homes should never be wired in series. (That would be like the old Christmas tree lights where, if one bulb burned out, the entire string would not light up.)
Parallel.
In a modern home you use parallel circuit's. The reason why they are parallel circuit and not series is For example: say your kitchen light goes off, if that light goes off the others in your house won't. They also use parallel circuit in schools. However, when there is a switch in the circuit, that switch is in series with the load, so you could say that electrical wiring is arranged in series-parallel.
Parallel circuits are used when there are many electronics on the same circuit, such as Christmas lights, for example. If they were on a series circuit, if one bulb went out all of them would go out. In your home, parallel circuits allow you to turn any electrical device on or off, independently of the others.
The most common of all circuits used in industry and around the home is the parallel circuit. In industry all MCC controls are in parallel with the supply distribution and around the home all lighting circuits are in parallel with the supply distribution panel.
torch
parallel circuit
Most homes (probably all homes) are wired in a parallel circuit (actually several parallel circuits and a few dedicated circuits) so that in the event of the failure of one device in the circuit, the rest will continue to function.
Home devices are connected in parallel and not in series.
A series circuit is a circuit that only has one path for current to flow on, a parallel circuit is a circuit that has multiple paths for current to flow on. Parallel circuits are mostly used, especially in your house/home. The reason of that is because, if a device in a series circuit electrically malfuctions or goes down, it will stop the current flow, thus ending and cuting the whole rest of the circuit. In a Parallel circuit, if a device electrically goes down, current will still be able to flow through the other circuit branches, and the rest of the circuit, thus keeping electricity flowing.
In my home, all of the utility outlets and all of the AC electrical devices we use arein parallel with all the others, and also with all similar outlets and devices in all ofthe homes of all of our neighbors whose houses are on the same transformer.
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)
You do not build a series circuit in your home. The only series circuits are the circuits that go through circuit breakers, light switches, and relays. Electrical and electronic devices use internal series circuits but those are the only ones people build. No one builds series circuits for house wiring. Electrical outlets are connected with parallel wiring.