In some energy meters, the disc rotates slowly and continuously when there is no load.the rotation of disc without any current through current coil and only due to excitation of pressure coil is called creeping.
The Aluminium disc in energy meter continues to slowly rotate even if no current
is supplied to the current coil . This rotation of the disc is known as creep .
Hii creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.
the value 'n' of meter constant indicates that consumption of energy is n KWh.
WikiAnswers does not give information about illegal acts, such as tampering with with a TOD meter.
energy meter
The meter constant represents the number of pulses will generated per hour nothing but after n number of pulses the meter reading is incremented by one.Read more: What_is_the_meter_constant_of_energy_meterAnswerAn energy meter measures the quantity of energy used by an installation. It does this, by monitoring the supply voltage and the in-phase component of the installation's load current.
The Aluminium disc in energy meter continues to slowly rotate even if no current is supplied to the current coil . This rotation of the disc is known as creep .
Hii creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.
A creep meter is a wire stretched across a fault to measure the horizontal movement from the ground.
A Creep Meter uses a wire stretched across a fault to measure horizontal movement of the ground.
A Creep Meter uses a wire stretched across a fault to measure horizontal movement of the ground.
A Creep Meter uses a wire stretched across a fault to measure horizontal movement of the ground.
a creep meter
no. a tiltimeater does. creep meters measure horizontal
the creep meter
Creep in electricity is the full revolution of the metal disk in a meter. The creep allows for one full revolution every ten minutes.
a creep meter 100% sure
yes