it is the coiled wire that heats up and gives off light in a incandescent (ordinary) light bulb.
All kinds of incandescent lamp, and all types of light bulb contains filament. But there are several kinds of filament applied each type of light bulb.
In vacuum tube devices, one electrode of the tube (the filament) needs low voltage at relatively high current, while another one (the plate) needs a high voltage at relatively low current. It's hard to build a single power supply to provide both of these, so the filament is usually supplied from its own separate transformer. Nobody has worried about things like this since a short time after transistors came along.
In an incandescent light bulb the wire that gives off the light is called the Filament.
Where is coil found?answer:
coil
Bulb's filament are wounded into a coil.
The filament is the small coil that glows when the bulb is on. I believe its made out of tungsten
The coil of wire in a light is called a filament. It is typically made of tungsten and produces light when an electric current passes through it, heating it to a high temperature.
That is the filament. Electricity traveling through the filament heats it to the point of glowing brightly - that is the light bulbs "light".
If you are talking about an incandescent light bulb then its called a filament. It is thin so that it has a high level of resistance. Current going through the filament causes it to heat up and give off EM radiation in the spectrum of visible light.
The filament in a light bulb is typically shaped into a coil or a straight wire. This shape helps to maximize the surface area of the filament, allowing it to emit more light and heat efficiently.
The filament used in a fluorescent lamp is made of a coated tungsten coil. When electricity passes through the coil, it excites the mercury vapor inside the lamp, producing ultraviolet light that then interacts with the phosphor coating on the inside of the lamp to produce visible light.
It's the small coil of very fine tungsten wire that glows white hot.
It's the small coil of very fine tungsten wire that glows white hot.
The coiled filament in a light bulb is designed to maximize its surface area for heat and light production while taking up minimal space. The coil shape also helps increase its resistance, allowing the filament to glow brightly when electricity passes through it.
It's the small coil of very fine tungsten wire that glows white hot.
A filament bulb resistor is the common type of light bulb. It contain a thin coil wire called filament. It produces light as a result. It is made mainly from the element tungsten. The metle tungsten has very high melting point and it is a good conductor of electric current