An induction relay works only with alternating current. It consists of an electromagnetic system which operates on a moving conductor, generally in the form of a disc or cup, and functions through the interaction of electromagnetic fluxes with the parasitic Fault currents which are induced in the rotor by these fluxes. These two fluxes, which are mutually displaced both in angle and in position, produce a torque that can be expressed by
T= Κ1.Φ1.Φ2 .sin θ,
Where Φ1 and Φ2 are the interacting fluxes and θ is the phase angle between Φ1 and Φ2. It should be noted that the torque is a maximum when the fluxes are out of phase by 90º, and zero when they are in phase.
It is a device used to protect Electric Network and loads
Squirrel cage type is a type of Induction motor. It tells that the rotor is "squirrel cage" type. Another type of induction motor is with "slip ring" type of rotor. Squirrel cage type is most widely used Induction motor.
Inverse definite minimum time lag relay
The fan in a convector is usually a single-phase induction motor.
generally induction motor of single phase is used in air cooler.
It is a device used to protect Electric Network and loads
Induction-type instrument measure power in alternating-current circuits and are the type commonly seen on the outside of houses.
Squirrel cage type is a type of Induction motor. It tells that the rotor is "squirrel cage" type. Another type of induction motor is with "slip ring" type of rotor. Squirrel cage type is most widely used Induction motor.
Could be a single phase induction motor of 20-40 watts.
single-phase induction motor is used in ceiling fan.
INDUCTION
Induction motor
There are none- The induction heats the pan (PS- HAS TO BA A CERTAIN TYPE), not the food directly. There is as much harm in induction as there is in traditional hot-plate.
it works on the principle of induction i.e. on the production of eddy currents in the moving system by the alternating fluxes
Your mum has got a big tumour and your grandads a cancer patient
If you want to control induction motor using a control relay give neutral directly to the one point of coil of relay & one point of coil of contactor then give control supply through push button to second point of coil of relay. use one NO point of relay and give supply to coil of contactor. and also use one NO of contactor for holding the contactor & take OFF (NC) in the starting to stop motor after complition of work. It is jut like an Direct On-line starter.
Ohm relay.......