big particles=low porosity
small particles=high porosity
To covert a high frequency to a low one, we use flip-flops.
On a multimeter, a high resistance would indicate a high Ohmic value and a low resistance would indicate a low Ohmic value. Specific values would be relative to device you are measuring.
at high voltage side, current is low. hence the size of conductors is reduced or small. At low voltage side, current is high. Hence the size of conductors is large.
Low resistance lets electrons through easy, and high makes it harder for them to pass. Basically electricity is harder to flow through high resistance and vice versa.
If you consider the transistor level of a module, active low means the capacitor in the output terminal gets charged or discharged based on low to high and high to low transition respectively. When it goes from high to low it depends on the pull down resistor that pulls it down and it is relatively easy for the output capacitance to discharge rather than charging. hence people prefer using active low signals.
poorly sorted = low porosity well sorted = high porosity
Porosity refers to the amount of empty space that is between particles of material. When something has a low porosity, it does not have much of this space between its particles.
High percentages of sand particles contribute to high porosity soil. This is because sand particles are large and create spaces between them, allowing for good drainage and aeration. Therefore, soils with a high sand content have more pore spaces, resulting in higher porosity.
Yes, it is possible for a rock to have high porosity, meaning it has a lot of open spaces or pores, but low permeability, indicating that the pores are not well connected or that the rock's structure hinders the flow of fluids. As a result, while the rock can hold a lot of fluid within its pores, the fluid may not be able to flow easily through it.
To carry out a hair porosity test, take a few clean strands of hair and place them in a bowl of water. If the hair sinks quickly, it has high porosity. If it floats, it has low porosity. If it floats in the middle, it has normal porosity. This test helps determine how well your hair absorbs and retains moisture.
Some soils may have high porosity due to a large number of interconnected pore spaces, but low permeability because the pores are small and not well connected. This restricts the movement of water through the soil, despite the high porosity.
Porosity is a measure of the void spaces in a material, typically expressed as a percentage of total volume. It indicates the amount of pore space available for fluids to flow through a substance, such as rock or soil. High porosity allows for greater fluid flow, while low porosity restricts fluid movement.
high porosity
To conduct a porosity hair test, take a strand of hair (clean and dry) and place it in a bowl of water. If the hair sinks quickly, it likely has high porosity. If it floats, it might have low porosity. If the hair floats in the middle of the water, it is considered to have normal porosity.
The term "porosity" refers to the ability of a rock to absorb water. Rocks with high porosity have more open spaces available for water storage, while rocks with low porosity have fewer open spaces, limiting their ability to absorb water.
As much as 1% in granites sold for interior use. That is "granite" not granite though.
Yes, aerogel is a good insulator due to its low density and high porosity, which help to minimize heat transfer.