in order to transmit the video signal amplitude modulation is used. the composite video signal has distinct polarity of black and white levels in the picture.
1.positive modulation :- in this type of modulation, increase of brightness toward white causes increase in carrier amplitude peak white has 100% modulation while black and sync level have lower and minimum modulation respectively
2.negative modulation :-in this type of modulation,the sync tip level are at 100%.blanking level correspond to black is at 75%and increase in brightness toward white causes decrease in carrier amplitude
Negative modulation is preferred over positive modulation because impulse interference is difficult to deal with and random increase in signal is similar to existing sync pulse.
these interference result in generation of black spot and white blobs.
ya, it can be negative because as m=Vm/Vc , the value of Vm if taken in negative then modulation index can be naegative
No, this will not work. Postitive to Negative/Negative to Positive will work.
Hot is positive.
DCEN means Direct Current Electrode Negative. Hook the welding cable to the Positive connection (+) on the machine, the ground cable to the Negative connection (-) Electricity travels from Negative pole to Positive pole.
due to velocity modulation density modulation occurs in TWT
ya, it can be negative because as m=Vm/Vc , the value of Vm if taken in negative then modulation index can be naegative
Positive + Negative = Negative Negative + Negative = Positive Positive + Positive = Positive Negative + Positive = Negative
Negative * positive = negative Positive * positive = positive Negative * negative = positive
The rules for the sign (positive or negative) of the result of a multiplication is the same as division. For multiplication: Positive * Positive --> Positive Positive * Negative --> Negative Negative * Positive --> Negative Negative * Negative --> Positive For division: Positive / Positive --> Positive Positive / Negative --> Negative Negative / Positive --> Negative Negative / Negative --> Positive
Yes. Negative/negative = positive Postive/Positive = positive Negative/Positive - negative
Negative * positive = negative Positive * positive = positive Negative * negative = positive
A negative divided by a positive is negative. A negative divided by a negative is positive. A positive divided by a positive is positive. A positive divided by a negative is negative.
It is positive and negative signal in the frequency of wave form, the voltage of amplitude modulation, that carriers the signal of frequency.In the process of graph showing result ...
Negatives and Positives Positive + Positive = Positive Negative + Negative = Positive Negative + Positive = Negative Positive + Negative = Negative
a negative x a negative= a positive, a positive x a positive= a positive, a negative x a positive= a negative, and a positive x a negative= a negative. Same thing with division. a negative divided by a negative= a positive, a positive divided by a positive= a positive, a negative divided by a positive= a negative, and a positive divided by a negative is a negative. U see?
positive and a positive is a positive negative and a negative is a positive to answer your question: positive and a negative is a negative.
negative*negative=positive negative/positive=negative negative\negative=positve negative-positive=change the sign to a plus and then change the number after the sign and get your answer negative +positive=which ever numbr is bigger minus positive+positive=positive