This case arises only in series dc generator current should be sent around the poles to magnetize. this current can the source(generator). current is passed through poles if it is loaded. but if it is not loaded current is zero through the field. load voltage should be zero actually.but this dont happen.we use generator frequently.due to this poles are partially magnetized this causes some voltage appear called residual voltage
Answer
There's no such thing as 'residual voltage'; you're confusing it with 'residual magnetism', which exists in the magnetic poles of a self-excited d.c. generator and which enables the build-up of its terminal voltage.
It is the process of conversion of generated ac voltage into the armature of a dc generator to dc voltage at the terminal of the dc generator by use of pair of brushes and commutator. OR It is the process of conversion of given dc voltage at the terminal of the dc motor to ac voltage in the armature windings in a dc motor by use of pair of brushes and commutator.
List the factors that affect the voltage building in D.C generator.
DC generator is used to produce direct current. The basic DC generator have four basic parts 1. A magnetic field 2. A single conductor or loop 3. A commutator 4. Brushes
If there is no residual magnetism in the field poles then there would be no flux too induce the initial voltage for self exitation
yes
poles are partially magnetized this causes some voltage called residual voltage
Residual voltage is the vector sum of all three phase voltages. Ideally this will be zero.
In any DC generator the causes to fail to produce voltage is loss of residual flux in the field or fields , poor brush contact in the commutator(clean the brushes and commutator) , check all the terminals of the generator and voltmeter may not be functioningand lastly check the coupling and the prime mover is rotating.
Residual magnetism in a self-excited generator refers to the small amount of magnetism that remains in the magnetic core after the generator has been de-energized. This residual magnetism is crucial for the initial excitation of the generator because it provides the necessary magnetic field to induce voltage when the generator is started. As the rotor turns, the residual magnetism induces a small voltage in the stator windings, which, when connected to the field windings, enhances the magnetic field and leads to self-excitation, allowing the generator to generate power. Without sufficient residual magnetism, the generator may fail to start or produce voltage.
It is the process of conversion of generated ac voltage into the armature of a dc generator to dc voltage at the terminal of the dc generator by use of pair of brushes and commutator. OR It is the process of conversion of given dc voltage at the terminal of the dc motor to ac voltage in the armature windings in a dc motor by use of pair of brushes and commutator.
If a self-excited generator lost all its residual magnetism, can it build up an output voltage?
List the factors that affect the voltage building in D.C generator.
DC generator is used to produce direct current. The basic DC generator have four basic parts 1. A magnetic field 2. A single conductor or loop 3. A commutator 4. Brushes
demagnetising effect of dc generator is to reduce main field flux there by reduction in generated voltage.
either a rectifier or a motor generator
There is only 1 type of DC voltage, and that is direct current. In order to better answer your question, you need to be more specific.
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.