The clock time of analog to digital converters depends on the design of the converter, which depends on the performance expectations for the system.
I thank that antalog time is the time on a analog clock, It makes since analog time on a analog clock.
we often confuse our-self with continuous time and analog signals. An analog signal is a signal which can take any amplitude in continuous range that is signal amplitude can take infinite values on the other hand a digital signal is one whose amplitude can take only finite numbers of values THE TERM CONTINUOUS SIGNAL AND DISCRETE SIGNAL CLASSIFY THE SIGNALS ALONG THE TIME (i.e. horizontal axis) where as THE TERM ANALOG AND DIGITAL SIGNAL CLASSIFY THE SIGNAL ALONG THE AMPLITUDE (i.e vertical axis)
The best way to teach a child to read an analogue clock is to begin with reading books that illustrate and teach the concept of time. After a child has a grasp of the concept of time, worksheets can help teach a child to read an analogue clock.
we have to do sampling in dsp because in dsp we have to convert all in analog signal in digital form so for converting into digital signal first we have to convert continuous tome signal into discrete time signal....so we use samplin in dsp...
An analog-to-digital converter (abbreviated ADC, A/D or A to D) is a device that converts a continuous quantity to a discrete digital number. The reverse operation is performed by a digital-to-analog converter (DAC).Typically, an ADC is an electronic device that converts an input analog voltage (or current) to a digital number proportional to the magnitude of the voltage or current. However, some non-electronic or only partially electronic devices, such as rotary encoders, can also be considered ADCs.The digital output may use different coding schemes. Typically the digital output will be a two's complement binary number that is proportional to the input, but there are other possibilities. An encoder, for example, might output a Gray code.An ADC might be used to make an isolated measurement. ADCs are also used to quantize time-varying signals by turning them into a sequence of digital samples. The result is quantized in both time and value
simply means the tester's measurement is displayed in an analog way (not digital) For example: a moving needle that points to a scale a clock with hands is ANALOG a clock that displays the time like this (11:55pm) is DIGITAL
An analog clock is one with an analog display (that shows you the time by means of a flat dial marked with the hours of the day and one or more pointers (hands) that point to the time of day on that dial). A true analog clock should also have a mechanical means for keeping the time and driving the pointers.Conversely a digital display would show you the time directly as numbers which change as the time passes and a true digital clock would calculate the time using a digital/electronic mechanism (a computer).
There is no such thing as 'analog time'. Time is measured the same way whether you use an analog or digital clock. An analog clock is represented as a circle, with 'hands' on its face that point to different numbers to tell the time. A digital clock is simply a set of numbers, usually accompanied by 'AM' or 'PM' to denote day or night. For instance: 9:42 PM
I thank that antalog time is the time on a analog clock, It makes since analog time on a analog clock.
The only time you will be in need of a digital converter is if you currently own an analog television that is connected to an over-the-air antenna signal.
An analog clock displays time using hands moving around a numbered dial, as opposed to a digital clock which shows time in numbers.
Analog clock shows time passing by moving hands continuously. In contrast, digital clock shows the time numerically. By analog clock you can tell the time between graduations to some extent by the location of the hands because the hands move continuously. But by digital clock, you can not read other than the information shown. If it shows seconds as well, you can tell more precisely
An analog clock is a clock with numbers in a circle and a minute and hour hand to tell the time.
Originally all clocks were analog clocks that showed the passage of time by the change of something measurable. When digital clocks which displayed only numbers to show the time came into use, the phrase analog clock was used to refer to older types of clocks.
Generally, analogue and digital. Digital directly displays the numbers which tell the time Analogue is the sort which has hands that point to numbers around a circular face.
<p><p> ADC Converters are those converters which converts continuous quantity to discrete time digital representation.Typically, an ADC is an electronic device that converts an input analog voltage or current to a digital number proportional to the magnitude of the voltage or current. * ADC is converting Analog to Digital,but Rectifiers converts from ALTERNATING CURRENT to DIGITAL CURRENT. ANALOG and ALTERNATING are different concepts. But , Rectifiers are totally different issue, they convert Alternating Current(AC) to Direct Current(DC). They cut the negative waveform from AC wave and make it uni- directional which is called Direct Current(DC) wave.
A digital clock can be looked at and the time will be known immediately. You do not need to know how to tell time with a digital clock.