answersLogoWhite

0

A combination starter usually applies to Motors.

It is a Motor Starter that has some sort of motor protection within its circuitry, i.e. fuses, or circuit breakers.

They typically contain Fuses, or Circuit Breakers, contactors, motor protection (in the form of Overload Heater-similar to circuit breakers, but may specifically for devices that draw a lot of current for a brief period).

Combo starters may also feature Forward or reverse starting configurations, and push buttons for On/Off Control.

Combo starters can be contained in a single enclosure, and combo starters can usually be found within MCCs (Motor Control Centers).

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Where is the starter relay on a 1992 Cutlass Supreme?

GM usually uses a combination solenoid/switch/relay located beside the starter. One end engages the starter. The other end connects the battery to the starter motor.


How do you hook up wires to a starter solenoid combination?

To connect wires to a starter solenoid combination, first ensure the vehicle is off and the battery is disconnected for safety. Attach the battery positive cable to the terminal labeled "B" or "Battery." Next, connect the starter motor wire to the terminal marked "S" or "Starter." Finally, if applicable, connect any additional wires, such as ignition or relay wires, according to your vehicle's wiring diagram, and then reconnect the battery.


How do you make energy on little alchemy?

Energy: Fire + Air = Energy Fire = Starter Air = Starter


What is difference in a cold climate starter motor?

Cold climate starters are capable of delivering higher current during cold start. Cold start system is always a combination of the starter motor with a suitable battery.


Why is your 2003 Kawasaki vulcan 750 hard to start?

usually a combination of low battery and faulty engine starter is the problem!


I have a 71 El Camino with a stock 350 motor and am having trouble shimming the starter to the flex plate and was wondering if there is a different combination of starter and flex to line up correctly?

Must be the wrong starter . Chevys do NOT have shims on there starters,small or big blocks. Now ,pontiacs do. Olds or Buick not sure... CHEVY NO...........


Where is the starter solenoid on a 1997 Chrysler Sebring convertible?

The starter solenoid is built on the starter.The starter solenoid is built on the starter.


Where is the solenoid on a 92 Dodge Ram van?

The starter solenoid is on the starter.The starter solenoid is on the starter.


What is a best combination of Pokémon to have on Pokémon emerald?

I like getting a fire or water starter for it will be easier. (Tho i did pick Treeco for a challange.) Mudkip is best, but i like Blazikins. So you should have a starter, a pokemon who's type is weak to your starter, a pokemon who's type is strong agenst your starter, a Suring pokemon, a flying pokemon, and a Legendary. if your at the begining, getting a shromish and evolving it will be useful later on.


How do you install a starter on a 94 Chevy Lumina v6 3.1L?

Place the starter into the starter position and secure it with the starter retaining bolts. Connect the starter cables to the front of the starter.


How do you install a starter on a 1967 Corvette?

Bolt the starter into the starter position. There will be three starter retaining bolts. Connect the cables to the front of the starter.


Where is the solenoid switch located on a 92 dodge ram van?

The starter solenoid is on the starter.The starter solenoid is on the starter.