70 Amps/cm2
By definition, the terms 'leading' and 'lagging' refer to what the load current is doing with respect to the supply voltage. So, for a 'lagging power factor', it is the current that is lagging.
only earthing can not be measure. Anyone can only measures the voltage and the current with respect to the earthing .Thus it is impossible to measure the earthing.
If the magnetic field is fluctuating, or the coil of wire and magnetic field are moving with respect to each other, then a current is induced in the coil of wire. If the two are stationary and the magnetic field is stable, then no current is induced in the coil. However, if there is a current in the coil, from another source, then the coil and the field will exhibit a relative force that will tend to move the coil with respect to the field.
Nominal Current:In respect to Current Transformers, its the allowable current in amperes which can be transmitted by each contact continuously and simultaneously.Load Current:Current flowing through the load.In General...'Nominal' means named. So the nominal current (or voltage) is the named current. For example, a charger may have a nominal current of 100 mA marked on its nameplate, but the actual current drawn by its load (the load current) may only be, say, 75 mA.
An asynchronous alternating-current machine, such as an induction motor or induction generator, in which the windings of two electric circuits rotate with respect to each other and power is transferred from one circuit to the other by electromagnetic induction.Reference: Wiki Answers
No, specific heat capacity is not inversely proportional to mass. Specific heat capacity is an intrinsic property of a material that describes the amount of heat required to raise the temperature of a unit mass of the material by one degree Celsius. It is not dependent on the mass of the material.
I need to know about soil improvement with respect to soil stress such as adding sand cement or similar higher stress material to get better bearing capacity.
The derivative of current with respect to voltage in an electrical circuit is called conductance, which represents how easily current flows through the circuit in response to changes in voltage.
current is relative because it is measured with respect to time. actually it is the rate of flow of charges with respect to time.when we measured current we measured charges with respect to time. that why it is relative quantity john ahem senior professor at Cambridge university
by taking into consideration the child's current interest
Today there is a material respect for one another.
You will act politely--you do not have a real relationship with him--and respect that relationship. It is not your time with him.
Cd , dvd, flash drives , hard disk devices .
For dc voltage signals, a capacitor is an open circuit. Current flow into a capacitor is proportional to variation of voltage (I = C dV/dt). So, if you polarize a capacitor with constant voltage, there won't be current flow. Instead, if you impose constant current, capacitor voltage will grow linearly (as a proof, you can integrate V-I formula with respect to time). An analogy can be found with hydraulics: current is water carrying capacity, voltage is water height (relate to potential energy) and capacitor is like a lung (i'm not sure about this term, it's a sort of elastic balloon full of water that squeezes and provides water when pressure falls down; when pressure comes up again, it recharges itself: it acts as water pressure stabilizer).
A horse of any age will respect you - but only if you teach it with kindness. Much of the current training methods train through fear, not respect. You can certain train a horse through fear, but that horse will NEVER respect you.
Polarization curve is measuring the corrosion rate of the metal with respect to current and voltage.
No. The only thing you can do online with respect to PF is - check your current balance.