It is the deflection on the screen (meter) per volt of deflection
Audio Frequency Oscilloscope and Cathode Ray Oscilloscope
change your resistance, its a little button, or if you are using an older oscilloscope, its a knob that will lower the sensitivity of the display. if it is something way higher than the oscilloscope can measure, you may have to run a resistor or transformer in the line.
CRO means cathode ray oscilloscope. The Cathode Ray tube is the display mechanism only. A CRO can be a digital or analog scope, with or without digital storage. A digital storage scope can use a CRO as the display mechanism, or it can use a LCD screen, or any other method. There was a type of Cathode Ray tube that used analog means to store the information on the screen, The storage takes place on the screen itself. They were pretty rare, and not seen at all today, as they didn't work very well. Perhaps that is what you are referring to?
Well, darling, a television is a device used for entertainment that displays images and sound, while a cathode ray oscilloscope is a fancy tool used for measuring and displaying voltage waveforms. So, in simpler terms, one is for binge-watching your favorite shows, and the other is for nerds who like to play with electricity. Hope that clears things up for you, honey!
A scope is nothing else then a display instrument it will amplify and display a signal on a CRT for visual analysis
Depends on the design of the 'scope and it's "X" & "Y" deflection amplifiers.
The unit of deflection sensitivity of a Cathode Ray Oscilloscope (CRO) is volts per division on the vertical axis of the screen. It represents how much voltage change is needed to move the electron beam by one division vertically on the screen.
The horizontal and vertical amplifier in the cathode-ray oscilloscope are deflection plates. The horizontal amplifier causes the beam to be deflected horizontally at a rate that is uniform. The vertical amplifier causes the beam to deflect vertically.
The anode voltage does not affect the sensitivity of a CRO. The input amplifier and deflection circuit have a greater influence. The Anode voltage will affect the focus and visibility of the trace, in this respect it will affect how you see the result.
Magnetic deflection sensitivity is a measure of how easily a magnetic field can cause deflection or deviation in the path of a charged particle such as an electron. It is influenced by factors such as the strength of the magnetic field, the charge and mass of the particle, and the speed at which the particle is moving. This sensitivity is important in applications like cathode ray tubes and particle accelerators.
Cathode ray oscilloscope
Audio Frequency Oscilloscope and Cathode Ray Oscilloscope
Magnetic deflection sensitivity of a cathode ray oscilloscope (CRO) is defined as the amount of deflection of electron spot produced when a magnetic flux density of 1 Wb/m2 is applied. SM = (e / m )1\2 x 1\ (2V0) 1\2 x l x L
500 $
cathode ray oscilloscope
Why is the speed of the electron beam greater than the speed of light in cathode ray oscilloscope.
Yes.