well the difference mainly exists in the method of finding them , these are :-
1. in finding DC load line :-
2. for AC load line:-
DC load line- A straight line joining saturation & cut off point.
The difference between a dc load line and an ac load line is the source of the electricity. A dc load line is coming from a battery and an ac load line is through a direct electrical current.
No difference a load is a load however AC/DC defines the type of a load that is.
when the dc supply given, dc load line lies in the Ic and Vcc. when the AC supply given, AC load line lies in the Ic and Vcc.
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
A kilowatt is an unit of true power in an AC circuit -as measured by a wattmeter. A kilovolt ampere is an unit of apparent power in an AC circuit, which is the product of the voltage across a load by the current through it. The relationship between the two is: kilowatt = (kilovolt ampere) x (power factor of load)
dc ammeter has three connecting pins while ac has four
The difference is the type of insulation on the conductors. Type AC used a thermoset insulation , Type ACT is a theromplactic insulation.
A dc load line is formed by joining the 2 points wherin the slope is equal to the inverse of the load resistance.. whereas the ac load lin has a different slope... and it intersects the dc load line at the quiescent point.
when the dc supply given, dc load line lies in the Ic and Vcc. when the AC supply given, AC load line lies in the Ic and Vcc.
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
chopper transforms ac to dc (dc chopper) while all inverter transform dc to ac commutation used in chopper: forced,load commutation used in inverter:forced(180 vsi),natural or line(120 vsi)
There is no difference between AC AND DC chockes
A kilowatt is an unit of true power in an AC circuit -as measured by a wattmeter. A kilovolt ampere is an unit of apparent power in an AC circuit, which is the product of the voltage across a load by the current through it. The relationship between the two is: kilowatt = (kilovolt ampere) x (power factor of load)
Ad is higher than ac
There is no difference in the cables. The only difference is the type of electrical power being transmitted. AC or DC applications use the same wires.
The difference AC and DC grounding is that AC is alternate current and DC is direct current. Grounding for both AC and DC is the same.
AC rises with respect to time but DC is steady.
AC is alternating current and AD is Anno Domini or after Christ.
No much difference between first class and first class ac. Only AC is the difference. First class does not have AC.