which is the standard in an american home?
10 Hz 10 Hz
There is no inherent disadvantage of 50 Hz compared with 60 Hz, bearing in mind that systems that run at 50 Hz are designed to run at 50 Hz.
60 Hz in North America, 50 Hz in Europe.
It's the difference between pressure and flow. The pressure is measured in volts, and the current in amps.Current is the flow of electrons.Power=VIcosϕV=voltageI=currentCosϕ=cosine of angle between V and IAnswerCurrent is a drift of electric charge, expressed in amperes. Power is the rate of doing work, expressed in watts (equivalent to a joule per second).
difference between detector and diode
10 Hz 10 Hz
The difference between 40 Hz and 200 Hz is 160 Hz.
Hz (hertz) and watts are different units of measurement. Hz measures frequency while watts measure power. You cannot directly convert Hz to watts without additional information about the system such as voltage or current.
Difference is in their frequency, audible sound waves is between 12 Hz and 20,000 Hz, Ultrasound waves is any sound that has a frequency beyond the 20,000 Hz limit
There are 1350 watts in a 60 hz bulb. There is a push not for everyone to transfer to led bulbs.
The wattage of a microwave is typically between 600 to 1200 watts. The frequency, in this case 60 Hz, refers to the electrical supply frequency rather than the power output of the microwave.
Watts = Volts / Ohms Watts = Volts x Amps
hz or more correctly Hz is a unit of frequency meaning cycles per secondhtz is a common misspelling of Hz
To convert frequency (Hz) to power (Watts), you cannot do a direct conversion as they are different units. Hertz (Hz) is a measurement of frequency, while Watts (W) is a unit of power. The frequency of 50 Hz in Europe refers to the cycles per second in the electrical supply, not the power consumption. To determine power consumption in watts, you would need additional information such as voltage and current.
Hertz (Hz) is a unit of frequency, not power. It cannot be directly converted to watts since they are different units of measurement. Watts are used to measure power while Hertz is used to measure frequency.
It could be anything from zero to infinity because Hertz are not proportional to either watts or volts. But 120 v supplies are common in America, where the frequency happens to be 60 Hz.
A typical microwave is 750-800 watts. There are lower (and higher) power machines, but the 'normal' for general use is 750-800 watts.