In romex, 14-2 means two conductors, 14AWG each, and 14-3 means three conductors, 14AWG each. Note: Normally, romex has a ground, so the designation is more likely to be 14-2/G or 14-3/G.
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
No, electrical wires can only be run in parallel on wire sizes 1/0 and larger. To supply a load of 30 amps you will need #10 wire and a 30 amp breaker.
2
The '12' and '14' refers to the gauge of the wire. A 14 gauge wire is used for circuits drawing 15 amps or less; general lighting and outlets. A 12 gauge wire is used for 20 amp circuits, like dishwashers, disposals, and microwaves. The '-2' refers to the number of conductors in the wire. 14-2 is a 14 gauge wire with 2 conductors in the sheath. A 14-3 with ground would have three conductors plus a ground in the sheath, for a total of four wires, and is most often used for ceiling fan wiring and three way switches.
You need no conduit on a residential home using Romex wiring with wooden studs. For a 15 amp circuit use 14/2 wire with a 15 amp breaker. This can only be used in bedrooms, living rooms, and dining areas. All other areas of the home require 12/2 wiring with a 20 amp breaker.
The amp rating of 14/2 Romex cable is typically 15 amps.
14
2.4
The difference between -25 and -11 is 14.
well they r the same like 2.14 = 2 14/100 or 2 and 14 hundredths
To wire a 3-way switch with 14-2 Romex, connect the black wire to the common terminal on one switch, the white wire to the common terminal on the other switch, and the red wire to the traveler terminals on both switches. Connect the ground wires to the switches and the bare copper wire to the ground terminal.
The differences between the numerical values 52, 36, 50, and 34 are as follows: The difference between 52 and 36 is 16. The difference between 52 and 50 is 2. The difference between 52 and 34 is 18. The difference between 36 and 50 is 14. The difference between 36 and 34 is 2. The difference between 50 and 34 is 16.
How would you regroup 4 tens to find the difference between 341 and 228?
8 and 6 have a difference of 2 and a sum of 14.
x > 16
26
-5